DSKY keyboard board

bsakel·dsky-ha-terminal·hardware/pcb/keyboard-board/keyboard_board.kicad_pcb

DSKY keyboard board layout, top view — open source RP2040/RP2350 board by bsakel

About the DSKY keyboard board

DSKY keyboard board is an open source RP2040/RP2350 PCB design by bsakel, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 168 × 77 mm, with 44 components from 26 distinct parts.

Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the SN74AHCT1G125DBVR. By type, the board carries 19 switches, 19 diodes, 2 ICs, 2 capacitors, 1 connector and 1 resistor.

It belongs with the keyboards designs in this gallery.

From the project

Both boards were routed and checked with the generator's own clearance and connectivity checks:

Both boards were routed and checked with the generator's own clearance and connectivity checks:

- 0.2 mm copper clearance and 0.4 mm to the board edge. - No errors and no unconnected nets.

1. Check the footprints against real parts. - Open lib/dsky.pretty in the footprint editor. - GateronLPHotswap. Check it against your socket's datasheet: the centre hole is 5.1 mm, the two pin holes are 3.0 mm, and the pads are on the back. Print the board 1:1 on paper and lay a switch on it. - RP2040-Zero. Check the pad pitch and pin names against the Waveshare drawing. The module is soldered to the back…

Main components on the DSKY keyboard board

DSKY keyboard board bill of materials (BOM)

44 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040-Zero
U1
1
SN74AHCT1G125DBVR
74AHCT1G125
U2
1
to status board
J1
1
VERB
SW1
1
NOUN
SW2
1
ENTR
SW3
1
RSET
SW4
1
+
SW5
1
7
SW6
1
8
SW7
1
9
SW8
1
CLR
SW9
1
-
SW10
1
4
SW11
1
5
SW12
1
6
SW13
1
PRO
SW14
1
0
SW15
1
1
SW16
1
2
SW17
Show 6 more
QtyPartRefs
1
3
SW18
1
KEY REL
SW19
19
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +11
1
CC0603KRX7R9BB104
100nF
C1
1
CL21A106KAYNNNE
10uF
C2
1
0603WAF3300T5E
330R
R1

DSKY keyboard board design files

The KiCad project lives in the bsakel/dsky-ha-terminal repository on GitHub; these links point at the commit this page was built from.

DSKY keyboard board: common questions

What microcontroller does the DSKY keyboard board use?

The DSKY keyboard board is built around the RP2040-Zero, from the RP2040/RP2350 family.

How big is the DSKY keyboard board?

The DSKY keyboard board measures 168 × 77 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DSKY keyboard board?

44 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DSKY keyboard board design files?

From the bsakel/dsky-ha-terminal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DSKY keyboard board design in my own project?

Yes, under the terms of its GPL-3.0 license, which bsakel chose for the repository.

Can I test firmware for the DSKY keyboard board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in dsky-ha-terminal

Similar boards