Stromverteiler
About the Stromverteiler PCB
Stromverteiler is an open source PCB design by Buschele06, published on GitHub. It is a 2-layer board measuring 44 × 59.7 mm, with 29 components from 13 distinct parts.
By type, the board carries 4 resistors, 2 capacitors, 1 transistor and 1 connector.
Stromverteiler bill of materials (BOM)
29 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BSS138 | SOT-23 | Q1 |
| 1 | Conn_01x03_Pin | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 5 | Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | 3,3V1, BNO1, LoP1, Signal1, SignalLED1 |
| 1 | 3,3out | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | 3,3V2 |
| 1 | Conn_01x02_Pin | CONN_31330102_MZC | 12Vin1 |
| 4 | Conn_01x02_Pin | Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | Arduino1, MotorOutput1, Output1, OutputPi1 |
| 1 | Conn_01x03_Pin | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | LEDAnzeige1 |
| 2 | Conn_01x04_Pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | LEDring1, StemmaToF1 |
| 4 | Conn_01x03_Pin | SW_100SP1T1B1M1QEH | Schalter1LED1, Schalter2Main1, Schalter3Motor1, Schalter4Pi1 |
| 2 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | Spannungswandler1, Spannungswandler2 |
| 1 | TSR1-2433E | Converter_DCDC_TRACO_TSR1-xxxxE_THT | Wandler1 |
| 2 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 4 | R_Small | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6, R7, R8 |
Stromverteiler design files
The KiCad project lives in the Buschele06/Offroad-CAD repository on GitHub; these links point at the commit this page was built from.
Stromverteiler: common questions
How big is the Stromverteiler PCB?
The Stromverteiler measures 44 × 59.7 mm, has 2 copper layers and is 1.73 mm thick.
How many components are on the Stromverteiler?
29 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stromverteiler design files?
From the Buschele06/Offroad-CAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stromverteiler design in my own project?
The repository has no license, so all rights stay with Buschele06. Use it as a reference, and ask the author before reusing the design.
