Gyro Platine links
About the Gyro Platine links PCB
Gyro Platine links is an open source PCB design by Buschele06, published on GitHub. It is a 2-layer board measuring 44.5 × 35 mm, with 17 components from 10 distinct parts.
Other key parts include the 2472. By type, the board carries 3 diodes, 3 capacitors, 3 resistors, 1 IC, 1 transistor and 1 LED.
It belongs with the sensors designs in this gallery.
Main components on the Gyro Platine links
Gyro Platine links bill of materials (BOM)
17 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2472 | MODULE_2472 | U1 |
| 1 | PMOS | SOT-23_IRLML2244TRPBF_INF | Q1 |
| 2 | Conn_01x03_Pin | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | BNOIn1, Pins1 |
| 2 | Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Knopf1, Knopf2 |
| 1 | Conn_01x04_Pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | Tofout1 |
| 1 | Conn_01x03_Pin | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | LED1 |
| 3 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3 |
| 3 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 2 | R_Small | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Gyro Platine links design files
The KiCad project lives in the Buschele06/Offroad-CAD repository on GitHub; these links point at the commit this page was built from.
Gyro Platine links: common questions
How big is the Gyro Platine links PCB?
The Gyro Platine links measures 44.5 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gyro Platine links?
17 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gyro Platine links design files?
From the Buschele06/Offroad-CAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gyro Platine links design in my own project?
The repository has no license, so all rights stay with Buschele06. Use it as a reference, and ask the author before reusing the design.
More boards in Offroad-CAD
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956