HardLabs

Arduino Servo Platine

Buschele06·Offroad-CAD·Platinen/Arduino Servo Platine/Arduino Servo Platine.kicad_pcb

Arduino Servo Platine PCB layout, top view — open source AVR/Arduino board by Buschele06

About the Arduino Servo Platine PCB

Arduino Servo Platine is an open source AVR/Arduino PCB design by Buschele06, published on GitHub. It is a 2-layer board measuring 40.4 × 52.8 mm, with 18 components from 9 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the TXB0104D. By type, the board carries 11 connectors, 2 capacitors, 1 IC, 1 module and 1 resistor.

It belongs with the robotics & motion designs in this gallery.

Arduino Servo Platine, from the project README
From the project README

Main components on the Arduino Servo Platine

TXB0104DArduino_Nano_v3.x

Arduino Servo Platine bill of materials (BOM)

18 components, 9 distinct parts.

QtyPartRefs
1
TXB0104D
U2
1
Arduino_Nano_v3.x
A1
3
Conn_01x03_Pin
J1, J9, J11
5
Conn_01x03_Pin
J2, J3, J4, J5, J6
2
Conn_01x15_Pin
J7, J8
1
Conn_01x06_Pin
J10
2
Conn_01x02_Pin
5Vin1, 7,5Vin1
2
C
C1, C2
1
R_Small
R1

Arduino Servo Platine design files

The KiCad project lives in the Buschele06/Offroad-CAD repository on GitHub; these links point at the commit this page was built from.

Arduino Servo Platine: common questions

What microcontroller does the Arduino Servo Platine use?

The Arduino Servo Platine is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Arduino Servo Platine PCB?

The Arduino Servo Platine measures 40.4 × 52.8 mm, has 2 copper layers and is 1.7 mm thick.

How many components are on the Arduino Servo Platine?

18 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino Servo Platine design files?

From the Buschele06/Offroad-CAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arduino Servo Platine design in my own project?

The repository has no license, so all rights stay with Buschele06. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arduino Servo Platine without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Offroad-CAD

Similar boards