As02mc04-jtag adapter

BushyToaster88·as02mc04-jtag-adapter·hw/as02mc04_jtag_hs3.kicad_pcb

As02mc04-jtag adapter PCB layout, top view — open source board by BushyToaster88

About the As02mc04-jtag adapter PCB

As02mc04-jtag adapter is an open source PCB design by BushyToaster88, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 24 × 29.6 mm, with 15 components from 12 distinct parts.

By type, the board carries 9 resistors, 2 connectors, 2 capacitors, 1 transistor and 1 diode.

It belongs with the usb & debug tools designs in this gallery.

From the project

JTAG adapter board between the Alibaba Cloud AS02MC04 (XCKU3P) FPGA card and a Digilent JTAG-HS3. KiCad 10, JLCPCB files included.

A small board that lets a Digilent JTAG-HS3 plug straight onto the 6-pin JTAG header (J4) of the Alibaba Cloud AS02MC04 FPGA card (label PN YZQT-02337-101, Xilinx Kintex UltraScale+ XCKU3P).

The HS3 has a 2x7, 2.00 mm Xilinx plug. The card has a 1x6, 2.54 mm pin header with a different pin order and no keying. This board converts one to the other, takes the HS3's reference voltage from the card's own 1V8 pin, and survives being plugged on the wrong way round.

As02mc04-jtag adapter, from the project README
From the project README

As02mc04-jtag adapter bill of materials (BOM)

15 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DMN1019USN-7
DMN1019USN
Diodes Incorporated
Q1
1
87832-1420
HS3 2x7 2.00mm
Molex
J1
1
PM2.54-1x6PWZ-H8.5
J4 socket 1x6 2.54mm RA
SHOU HAN
J2
1
KT-0603R
RED REVERSED
Hubei KENTO
D2
1
CL10A105KB8NNNC
1uF
Samsung
C1
1
CC0603KRX7R9BB104
100nF
YAGEO
C2
4
0603WAF220JT5E
22R
UNI-ROYAL
R1, R2, R3, R4
1
0603WAF1001T5E
1k
UNI-ROYAL
R5
1
0603WAF1002T5E
10k
UNI-ROYAL
R7
1
0603WAF330JT5E
33R
UNI-ROYAL
R8
1
CRCW12064R70FKEAHP
4R7 0.75W
Vishay
R9
1
0603WAF1004T5E
1M
UNI-ROYAL
R10

As02mc04-jtag adapter design files

The KiCad project lives in the BushyToaster88/as02mc04-jtag-adapter repository on GitHub; these links point at the commit this page was built from.

As02mc04-jtag adapter: common questions

How big is the As02mc04-jtag adapter PCB?

The As02mc04-jtag adapter measures 24 × 29.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the As02mc04-jtag adapter?

15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the As02mc04-jtag adapter design files?

From the BushyToaster88/as02mc04-jtag-adapter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the As02mc04-jtag adapter design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which BushyToaster88 chose for the repository.

Similar boards