STM32U031 board
bwindrim·KiCAD·STM32U031_board/STM32U031_board.kicad_pcb
About the STM32U031 board
STM32U031 board is an open source STM32 PCB design by bwindrim, published on GitHub. It is a 2-layer board measuring 51 × 21 mm, with 10 components from 9 distinct parts.
Its main chip is the STM32U031K8Ux, from the STM32 family. Other key parts include the TPSM365R6V3RDNR. By type, the board carries 6 connectors, 2 ICs and 2 capacitors.
Main components on the STM32U031 board
STM32U031 board bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32U031K8Ux | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | TPSM365R6V3RDNR | RDN0011A-MFG | U3 |
| 1 | Conn_01x20 | Pico_Header_1-20 | J1 |
| 1 | Conn_01x20 | Pico_Header_21-40 | J2 |
| 1 | SWD | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | UART | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J4 |
| 1 | QT/ST | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | 3.6-15V in | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J6 |
| 2 | 100nF | C_0402_1005Metric | C3, C4 |
STM32U031 board design files
The KiCad project lives in the bwindrim/KiCAD repository on GitHub; these links point at the commit this page was built from.
STM32U031 board: common questions
What microcontroller does the STM32U031 board use?
The STM32U031 board is built around the STM32U031K8Ux, from the STM32 family.
How big is the STM32U031 board?
The STM32U031 board measures 51 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32U031 board?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32U031 board design files?
From the bwindrim/KiCAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32U031 board design in my own project?
The repository has no license, so all rights stay with bwindrim. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32U031 board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in KiCAD
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k