5 open source boards using the STM32U031K8Ux

Real designs built with the STM32U031K8Ux, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32U031K8Ux

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32U031K8Ux connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The VDDA pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The PC14 pin has a crystal on 3 of 5 designs, most often 32.768 kHz (then 32.786 kHz).
  • The PC14 pin has a capacitor to GND on 3 of 5 designs, most often 18 pF (then 12 pF).
VDDpin 1, 17Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (8), 10 µF (1), 4.7 µF (1)
PC14pin 2Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 32.768 kHz (1), 32.786 kHz (1)
  • Capacitor to GND on 60% · 18 pF (1), 12 pF (1), 22 pF (1)
PC15pin 3Connected to: Signal 80% · GND 20%
  • Capacitor to GND on 60% · 18 pF (1), 12 pF (1), 22 pF (1)
  • Crystal on 60% · 32.768 kHz (1), 32.786 kHz (1)
PF2pin 4Connected to: A connector 60%
  • Capacitor to GND on 40% · 100 nF (1), 100 pF (1)
VDDApin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (4), 10 µF (2)
PA2pin 8Connected to: Signal 100%
  • Series resistor on 40% · 330 Ω (1), 100 Ω (1)
PA3pin 9Connected to: Signal 100%
  • Series resistor on 40% · 2 kΩ (1), 100 Ω (1)
PA4pin 10Connected to: Signal 80% · VREF 20%
  • Series resistor on 40% · 2 kΩ (1), 10 kΩ (1)
VSSpin 16, 32, 33Connected to: GND 100%
PA9pin 19Connected to: A connector 40%
  • Pull-up to BATT on 40% · 10 kΩ (1), 4.7 kΩ (1)
PA12pin 22Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 330 Ω (1), 1 kΩ (1)
PF3pin 31Connected to: Signal 60% · not connected 20% · GND 20%
  • Resistor to GND on 40% · 10 kΩ (2)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Earringv3 by aykevl, STM32U031 board by bwindrim, Aurora-Watch by CooperW824 and RF Remote by MarijnVerschuren.

The STM32U031K8Ux in open source designs

The gallery holds 5 open source boards using the STM32U031K8Ux from 5 GitHub repositories; a typical one measures about 35.5 × 33.7 mm and carries around 61 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Earringv3 by aykevl.

Parts used alongside the STM32U031K8Ux

Microcontrollers on boards using the STM32U031K8Ux

What boards using the STM32U031K8Ux are built for

STM32U031K8Ux: common questions

Where can I find a STM32U031K8Ux reference design?

Each of the 5 boards on this page is a real design using the STM32U031K8Ux. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32U031K8Ux VDD pin?

The VDD pins have a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the STM32U031K8Ux.

What decoupling capacitors do designs use on the STM32U031K8Ux VDDA pin?

The VDDA pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the STM32U031K8Ux.

How is the STM32U031K8Ux PC14 pin connected?

The PC14 pin has a crystal on 3 of 5 designs, most often 32.768 kHz (then 32.786 kHz). Counted from the KiCad layouts of 5 open source designs using the STM32U031K8Ux.

Which microcontrollers do boards using the STM32U031K8Ux use?

Most are built on STM32 (5).

How big is a typical board using the STM32U031K8Ux?

The median is 35.5 × 33.7 mm, and 40% are two-layer designs.

What is the most popular open source board using the STM32U031K8Ux?

By GitHub stars, Earringv3 by aykevl, with 81 stars.

Can I simulate one of these boards using the STM32U031K8Ux before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part