HardLabs

6809-v0

bwindrim·KiCAD·6809-v0/6809-v0.kicad_pcb

6809-v0 PCB layout, top view — open source RP2040/RP2350 board by bwindrim

About the 6809-v0 PCB

6809-v0 is an open source RP2040/RP2350 PCB design by bwindrim, published on GitHub. It is a 2-layer board measuring 152.4 × 101.6 mm, with 7 components from 6 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MC68B09, 2764, W65C51NxP, W65C22NxP and CY62256-70PC. By type, the board carries 6 ICs and 1 module.

Main components on the 6809-v0

MC68B092764W65C51NxPW65C22NxPCY62256-70PCRaspberryPi_Pico

6809-v0 bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
MC68B09
U1
1
2764
U2
1
W65C51NxP
U3
1
W65C22NxP
U4
2
CY62256-70PC
U5, U6
1
RaspberryPi_Pico
A1

6809-v0 design files

The KiCad project lives in the bwindrim/KiCAD repository on GitHub; these links point at the commit this page was built from.

6809-v0: common questions

What microcontroller does the 6809-v0 use?

The 6809-v0 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the 6809-v0 PCB?

The 6809-v0 measures 152.4 × 101.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 6809-v0?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the 6809-v0 design files?

From the bwindrim/KiCAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 6809-v0 design in my own project?

The repository has no license, so all rights stay with bwindrim. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 6809-v0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in KiCAD

Similar boards