BIAS TEE
About the BIAS TEE PCB
BIAS TEE is an open source PCB design by ByTechLab, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 43 × 24 mm, with 16 components from 13 distinct parts.
By type, the board carries 5 capacitors, 4 resistors, 3 connectors, 1 fuse and 1 inductor.
It belongs with the rf & radio designs in this gallery.
From the project
Mostly 3D printed discone antenna for Software Definied Radio.
BIAS TEE bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB4105-GF-A ~ GCT | J_USB_C_USB4105 | J1 |
| 1 | 132366 ~ Amphenol RF | J_132366 | J2 |
| 1 | RF2-143-T-17-50-G ~ Adam Tech | J_RF2-143-T-17-50-G | J3 |
| 1 | 0ZCJ0025AF2E ~ BEL Fuse | F_250mA_24V_1206 | F1 |
| 1 | CG775MS ~ Littelfuse | GDT_CG775MS | GDT1 |
| 1 | CGA0603MLC-05E ~ Bourns | R_0603_1608 | TVS1 |
| 1 | WA8514-AE 5.6uH Coilcraft | L_RF_5.6uH_4.4x2mm_WA8514-AE | L1 |
| 1 | C0603X104K1RACTU 100n Kemet | C_0603_1608 | C1 |
| 1 | 885012206052 1u Wurth Elektronik | C_0603_1608 | C2 |
| 2 | GRM155R71H104KE14D 100n Murata | C_0402_1005 | C3, C4 |
| 1 | GRM1885C1H103JA01D 10n Murata | C_0603_1608 | C5 |
| 2 | ERJ-2RKF5101X 5.1k Panasonic | R_0402_1005 | R1, R2 |
| 2 | ERJ-2RKF1004X 1M Panasonic | R_0402_1005 | R3, R4 |
BIAS TEE design files
The KiCad project lives in the ByTechLab/RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz- repository on GitHub; these links point at the commit this page was built from.
BIAS TEE: common questions
How big is the BIAS TEE PCB?
The BIAS TEE measures 43 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BIAS TEE?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BIAS TEE design files?
From the ByTechLab/RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz- repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BIAS TEE design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which ByTechLab chose for the repository.
More boards in RF---Mostly-3D-Printed-Discone-Antenna--0.08-1-GHz-
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568
GoodPocketWatch
75.2 × 101.2 mm56 parts2LNo license568
Goodwatch31
25.6 × 27.6 mm23 parts2LNo license568