11800-Replacement
calliah333·11800-Replacement-PCB·PCB/TKL.kicad_pcb
About the 11800-Replacement PCB
11800-Replacement is an open source STM32 PCB design by calliah333, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 391.2 × 166.5 mm, with 125 components from 13 distinct parts.
Its main chip is the STM32F072C8TX, from the STM32 family. Other key parts include the USBLC6-2SC6 and XC6206PXXXMR-REGULATOR_LINEAR. By type, the board carries 102 diodes, 8 capacitors, 8 resistors, 3 ICs, 2 switches and 1 connector.
From the project
This is a replacement PCB for the Cherry G80-11800
This is a replacement PCB for the Cherry G80-11800
There is currently a space for the trackball on the PCB, but it is unimplemented in firmware.
These have been tested and are working (Except for trackball)
PCB source files are provided in the PCB\ folder
Gerber files are located in PCB\Gerbers, with CPL/BOM files at PCB\Gerbers\productionfiles\`
A source files and a precompiled vial firmware binary are located in Firmware\

Main components on the 11800-Replacement
11800-Replacement bill of materials (BOM)
125 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | STM32F072C8TX STM32F072C8Tx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | XC6206PXXXMR-REGULATOR_LINEAR XC6206PxxxMR-Regulator_Linear | SOT-23 | U3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 500MA 500mA | Fuse_1206_3216Metric | F1 |
| 2 | C318884 RST | SW_SPST_SKQG_WithoutStem | SW1, SW2 |
| 102 | 1N4148 1n4148 | D_SOD-123-EditSkilk | D4, D5, D6, D7, D8, D9, D10, D11 +94 |
| 6 | 100NF 100nF | C_0402_1005Metric | C1, C3, C4, C5, C6, C7 |
| 2 | 1UF 1uF | C_0402_1005Metric | C8, C9 |
| 1 | 10K 10k | R_0402_1005Metric | R1 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R2, R3 |
| 3 | 470 | R_0402_1005Metric | R4, R5, R6 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R7, R8 |
11800-Replacement design files
The KiCad project lives in the calliah333/11800-Replacement-PCB repository on GitHub; these links point at the commit this page was built from.
11800-Replacement: common questions
What microcontroller does the 11800-Replacement use?
The 11800-Replacement is built around the STM32F072C8TX, from the STM32 family.
How big is the 11800-Replacement PCB?
The 11800-Replacement measures 391.2 × 166.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 11800-Replacement?
125 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 11800-Replacement design files?
From the calliah333/11800-Replacement-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 11800-Replacement design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the 11800-Replacement without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k