9 open source boards using the XC6206PxxxMR-Regulator_Linear
Real designs built with the XC6206PxxxMR-Regulator_Linear, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Mist
modern-hobbyist
372.1 × 141.2 mm445 parts2LMIT25
STM32Heimdall
405.4 × 159 mm316 parts4LMIT25
STM32Hermod right
3.6 × 3.3 mm212 parts2LMIT25
STM32Hermod left
3.6 × 3.3 mm196 parts2LMIT25
STM32Modern lcd keyboard
72 × 44.5 mm184 parts2LMIT25
STM32Hermod
189.2 × 139.5 mm177 parts2LMIT25
STM32Paste
3.6 × 3.3 mm72 parts2LMIT25
STM32Stm32G474RETx template
134.5 × 76 mm46 parts2LMIT25
STM32Modern keyboard template
44 × 44.1 mm25 parts2LMIT25
The XC6206PxxxMR-Regulator_Linear in open source designs
The gallery holds 9 open source boards using the XC6206PxxxMR-Regulator_Linear from 1 GitHub repository; a typical one measures about 72 × 44.5 mm and carries around 184 components.
89% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Mist by modern-hobbyist.
Microcontrollers on boards using the XC6206PxxxMR-Regulator_Linear
What boards using the XC6206PxxxMR-Regulator_Linear are built for
XC6206PxxxMR-Regulator_Linear: common questions
Where can I find a XC6206PxxxMR-Regulator_Linear reference design?
Each of the 9 boards on this page is a real design using the XC6206PxxxMR-Regulator_Linear. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XC6206PxxxMR-Regulator_Linear use?
Most are built on STM32 (9).
How big is a typical board using the XC6206PxxxMR-Regulator_Linear?
The median is 72 × 44.5 mm, and 89% are two-layer designs.
What is the most popular open source board using the XC6206PxxxMR-Regulator_Linear?
By GitHub stars, Mist by modern-hobbyist, with 25 stars.
Can I simulate one of these boards using the XC6206PxxxMR-Regulator_Linear before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.