Bluetooth wall player
canardos·bluetooth-wall-player·hardware/pcb/bt_audio_rec.kicad_pcb
About the Bluetooth wall player PCB
Bluetooth wall player is an open source STM32 PCB design by canardos, published on GitHub under the MIT license. It is a 2-layer board measuring 54 × 82 mm, with 62 components from 41 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the RN52-I/RM116, VCNL4200, MCP1661, BME280 and TPS22860DBVR. By type, the board carries 19 capacitors, 16 resistors, 11 connectors, 6 ICs, 4 transistors and 2 crystals.
It belongs with the audio, iot & wireless and sensors designs in this gallery.
From the project
Firmware and hardware design for a wall-mounted Bluetooth audio player and environmental monitor
- Media/volume controls - Song metadata display - Time, temperature, pressure, humidity display on idle - Ultra low power sleep with proximity sensing wakeup - Differential analog and S/PDIF digital audio output
This repo contains the firmware and PCB/enclosure design.
See custom electronics projects at DuckToast.com for full project details.
The project uses the PlatformIO dependency management/build system. If you have PlatformIO installed, executing the run command in the root folder should 🙏 be all that is required for a successful build. The platformio.ini file contains the required…

Main components on the Bluetooth wall player
Bluetooth wall player bill of materials (BOM)
62 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RN52-I/RM116 RN52-I_RM116 | Bluetooth_module_Microchip_RN52 | IC1 |
| 1 | VCNL4200 | Proximity_Sensor_Vishay_VCNL4200 | IC2 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | MCP1661 | SOT-23-5 | U2 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | TPS22860DBVR | SOT-23-6 | U4 |
| 3 | Si1308EDL | SOT-323_SC-70 | Q1, Q2, Q3 |
| 1 | DMG2301L | SOT-23 | Q4 |
| 1 | 8MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | RV-8803-C7-TA-QC | RTC_Microcrystal_RV-8803-C7-TA-QC | Y2 |
| 1 | OutL | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 1 | AYF333135 | FPC_Socket_0.3_31_Panasonic_AYF333135 | J2 |
| 1 | RN52 factory reset | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | ERM | PinHeader_1x02_P2.54mm_Horizontal | J4 |
| 1 | OutR | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | Debug | PinSocket_2x04_P2.54mm_Vertical | J6 |
| 1 | OutSPDIF | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 1 | Buttons | PinHeader_1x08_P2.54mm_Horizontal | J8 |
| 1 | Power | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J13 |
| 1 | PROX Socket | PinSocket_2x03_P2.54mm_Vertical | J14 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PROX Header | PinHeader_2x03_P2.54mm_Vertical | J15 |
| 1 | 500mA | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | F1 |
| 1 | MBR0520 | D_SOD-123 | D1 |
| 1 | PCB_LED | D_0603_1608Metric | D2 |
| 1 | VLCF4024T-4R7 | Inductor_L_TDK_VLCF4024 | L1 |
| 2 | 24pF | C_0402_1005Metric | C1, C5 |
| 6 | 4.7uF | C_0603_1608Metric | C2, C3, C4, C12, C13, C14 |
| 5 | 0.1uF | C_0402_1005Metric | C6, C7, C9, C10, C11 |
| 4 | 0.01uF | C_0402_1005Metric | C8, C15, C16, C18 |
| 1 | 1uF | C_0805_2012Metric | C17 |
| 1 | 680uF | C_Radial_D6.3mm_H7.0mm_P2.50mm | C19 |
| 1 | 330R | R_0603_1608Metric | R1 |
| 1 | 560k | R_0603_1608Metric | R2 |
| 4 | 20k | R_0603_1608Metric | R3, R4, R5, R14 |
| 3 | 100R | R_0603_1608Metric | R6, R7, R8 |
| 2 | 4.7k | R_0603_1608Metric | R10, R11 |
| 1 | 1k | R_0603_1608Metric | R12 |
| 1 | 1.8R | R_0603_1608Metric | R13 |
| 1 | 1M | R_0603_1608Metric | R15 |
| 1 | 180k | R_0603_1608Metric | R16 |
| 1 | 13R | R_0603_1608Metric | R17 |
Bluetooth wall player design files
The KiCad project lives in the canardos/bluetooth-wall-player repository on GitHub; these links point at the commit this page was built from.
Bluetooth wall player: common questions
What microcontroller does the Bluetooth wall player use?
The Bluetooth wall player is built around the STM32F103C8Tx, from the STM32 family.
How big is the Bluetooth wall player PCB?
The Bluetooth wall player measures 54 × 82 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bluetooth wall player?
62 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bluetooth wall player design files?
From the canardos/bluetooth-wall-player repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bluetooth wall player design in my own project?
Yes, under the terms of its MIT license, which canardos chose for the repository.
Can I test firmware for the Bluetooth wall player without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k