Microbit eink feather
carlosperate·microbit-eink-feather·hardware/microbit_eink_feather_adaptor.kicad_pcb
About the Microbit eink feather PCB
Microbit eink feather is an open source PCB design by carlosperate, published on GitHub under the Custom license license. It is a 2-layer board measuring 78.7 × 56.5 mm, with 5 components from 5 distinct parts.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
This is a simple FeatherWing to micro:bit adaptor board designed specifically for the Adafruit 2.9" Grayscale eInk / ePaper Display FeatherWing: https://www.adafruit.com/product/4777
This is a simple FeatherWing to micro:bit adaptor board designed specifically for the Adafruit 2.9" Grayscale eInk / ePaper Display FeatherWing: https://www.adafruit.com/product/4777
- datasheets: Datasheets for the components used in this adaptor board - docs: Documentation related to this adaptor board - firmware: Arduino Skectch to test the eInk FeatherWing with a micro:bit - hardware: The KiCad project files - output: Project output files, like the BOM, schematic PDFs, etc. - interactivebom: BOM output from the Interactive HTML BOM KiCad plugin. - pdf: Schematic PDFs. - production**…

Microbit eink feather bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | feather long | PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | feather short | PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | microbit_edge_connector | 4UCON_10156_2x40_P1.27mm_Socket_Horizontal | J3 |
| 1 | N/C (battery holder) | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Butterfly Hole | butterfly_hole | H1 |
Microbit eink feather design files
The KiCad project lives in the carlosperate/microbit-eink-feather repository on GitHub; these links point at the commit this page was built from.
Microbit eink feather: common questions
How big is the Microbit eink feather PCB?
The Microbit eink feather measures 78.7 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microbit eink feather?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Microbit eink feather design files?
From the carlosperate/microbit-eink-feather repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Microbit eink feather design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k