EPS
carmamo·Avionics-FYCUS·Hardware/EPS/EPS.kicad_pcb
About the EPS PCB
EPS is an open source STM32 PCB design by carmamo, published on GitHub. It is a 4-layer board measuring 85 × 85 mm, with 102 components from 53 distinct parts.
Its main chip is the STM32L431RCT, from the STM32 family. Other key parts include the HZ0805E601R-10, LTC4162EUFD-L41#PBF, AP7361C-25Y5-13, RT8258GE and TPS27081ADDCR. By type, the board carries 34 resistors, 29 capacitors, 13 diodes, 10 connectors, 8 ICs and 3 inductors.
It belongs with the rf & radio and science & space designs in this gallery.
From the project
This project involves the creation of the PCB and firmware for a 3U CubeSat, in collaboration with FYCUS, a team of passionate students at the University of Seville. Our mission is to design, manufacture and operate small satellites, and this project is a critical step in achieving that goal.
This project involves the creation of the PCB and firmware for a 3U CubeSat, in collaboration with FYCUS, a team of passionate students at the University of Seville. Our mission is to design, manufacture and operate small satellites, and this project is a critical step in achieving that goal.
Our team will be responsible for the design and implementation of the PCB and firmware, which are essential components of the CubeSat's operation.

Main components on the EPS
EPS bill of materials (BOM)
102 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L431RCT | LQFP-64 | U201 |
| 1 | HZ0805E601R-10 | BEADC2012X90N | U202 |
| 1 | LTC4162EUFD-L41#PBF | QFN50P500X400X80-29N | U301 |
| 1 | AP7361C-25Y5-13 AP7361C-33Y5-13 | AP7361C25Y513 | U401 |
| 2 | RT8258GE | SOT94P279X130-6N | U501, U503 |
| 1 | TPS27081ADDCR Texas Instruments | SOT-23-6 | U502 |
| 1 | B230A-13-F | DIOM5226X230N | U504 |
| 2 | RQ3G100GNTB | RQ3G100GNTB | Q301, Q302 |
| 1 | NX5032GA-8.000M-STD-CSU-1 | XTAL_NX5032_NDK | Y201 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J101 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P2.00mm_Vertical | J201 |
| 1 | Conn_02x02_Counter_Clockwise | PinHeader_2x02_P2.54mm_Vertical | J301 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J401 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J601 |
| 5 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J701, J801, J901, J1001, J1101 |
| 1 | Jumper_3_Open | PinHeader_1x03_P2.54mm_Vertical | JP301 |
| 1 | 10k | PinHeader_1x02_P1.00mm_Vertical | TH301 |
| 6 | LSM115JE3/TR13 LSM115JE3_TR13 | DIOM5436X330N | D101, D502, D701, D801, D901, D1001 |
| 1 | BZT585B24T-7 | D_SOD-523 | D102 |
| 1 | LED_R | LED_0603_1608Metric | D201 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_G | LED_0603_1608Metric | D202 |
| 1 | LED_YL | LED_0603_1608Metric | D203 |
| 1 | LED (YL) | LED_0603_1608Metric | D301 |
| 1 | PESD5V0S1BB_115 | D_SOD-523 | D401 |
| 1 | B230A-13-F | DIOM5226X230N | D501 |
| 1 | 4.7uH | XAL1060222MEB | L301 |
| 1 | 10uH | SLF12555T | L501 |
| 1 | 15uH | SLF12565 | L502 |
| 4 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C304, C401, C402 |
| 8 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C202, C203, C204, C205, C209, C301, C303, C505 |
| 3 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C207, C305, C501 |
| 3 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C208, C503, C507 |
| 2 | 6pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C210, C211 |
| 2 | 150uF | CAP_EEHZS1H151V | C302, C309 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C306, C308 |
| 1 | 22nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C307 |
| 2 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C502, C506 |
| 2 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C504, C508 |
| 4 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R202, R203, R204 |
| 2 | 130 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R205, R206 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R207 |
| 4 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R208, R309, R310, R501 |
| 5 | 3.3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R209, R702, R802, R902, R1002 |
| 2 | 10m | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R301, R307 |
| 1 | 2.49 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R302 |
| 4 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R303, R304, R306, R502 |
| 1 | 1.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R305 |
| 1 | 63.4k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R308 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R401, R402 |
| 1 | 32.4k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R503 |
| 1 | 91k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R504 |
| 1 | 17.4k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R505 |
| 4 | 18k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R701, R801, R901, R1001 |
EPS design files
The KiCad project lives in the carmamo/Avionics-FYCUS repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/EPS/EPS.kicad_pcb
- SchematicHardware/EPS/EPS.kicad_sch
EPS: common questions
What microcontroller does the EPS use?
The EPS is built around the STM32L431RCT, from the STM32 family.
How big is the EPS PCB?
The EPS measures 85 × 85 mm, has 4 copper layers and is 1.62684 mm thick.
How many components are on the EPS?
102 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the EPS design files?
From the carmamo/Avionics-FYCUS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the EPS design in my own project?
The repository has no license, so all rights stay with carmamo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the EPS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Avionics-FYCUS
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k