WT32-ETH01 PWM Fan Controller
Caroma97·WT32-ETH01_PWM_Fan_Controller·PCB/WT32-ETH01_PWM_Fan_Controller V1.kicad_pcb
About the WT32-ETH01 PWM Fan Controller PCB
WT32-ETH01 PWM Fan Controller is an open source PCB design by Caroma97, published on GitHub under the MIT license. It is a 2-layer board measuring 84 × 57.8 mm, with 17 components from 12 distinct parts.
Other key parts include the WT32_ETH01. By type, the board carries 6 connectors, 6 resistors, 2 ICs, 2 capacitors and 1 fuse.
It belongs with the iot & wireless and displays & leds designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
esphome compartible dual fan controller
��# WT32-ETH01PWMFan_Controller
Main components on the WT32-ETH01 PWM Fan Controller
WT32-ETH01 PWM Fan Controller bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WT32_ETH01 | WT32_ETH01 | U1 |
| 1 | ~ | 2596S-ADJ_3A_DC-DC_Step_Down_Buck_Power_Module | U2 |
| 1 | Programming Port | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J2 |
| 1 | FAN1 | FanPinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | FAN2 | FanPinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Flash | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | I2C | FanPinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Fuse | Fuse-PTF75_Stelvio | F1 |
| 2 | 0,1n | C_Rect_L11.0mm_W3.4mm_P10.00mm_MKT | C1, C2 |
| 2 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3 |
| 4 | 3,3k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R5, R6 |
WT32-ETH01 PWM Fan Controller design files
The KiCad project lives in the Caroma97/WT32-ETH01_PWM_Fan_Controller repository on GitHub; these links point at the commit this page was built from.
WT32-ETH01 PWM Fan Controller: common questions
How big is the WT32-ETH01 PWM Fan Controller PCB?
The WT32-ETH01 PWM Fan Controller measures 84 × 57.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WT32-ETH01 PWM Fan Controller?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the WT32-ETH01 PWM Fan Controller design files?
From the Caroma97/WT32-ETH01_PWM_Fan_Controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WT32-ETH01 PWM Fan Controller design in my own project?
Yes, under the terms of its MIT license, which Caroma97 chose for the repository.
Earlier revisions in the repo: WT32-ETH01_PWM_Fan_Controller
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k