CapacitorDischarger 1S
CatalinSerafimescu·CapacitorDischarger·KiCAD/CapacitorDischarger_1S.kicad_pcb
About the CapacitorDischarger 1S PCB
CapacitorDischarger 1S is an open source PCB design by CatalinSerafimescu, published on GitHub. It is a 2-layer board measuring 100 × 75 mm, with 39 components from 21 distinct parts.
By type, the board carries 5 diodes, 5 resistors, 4 connectors, 2 transistors and 1 fuse.
It belongs with the retro computing designs in this gallery.
From the project
A professional, handheld capacitor discharger designed for safely discharging high-voltage capacitors in hobby electronics restoration — tube amplifiers, vintage radios, CRT televisions, and consumer power supplies.
A professional, handheld capacitor discharger designed for safely discharging high-voltage capacitors in hobby electronics restoration — tube amplifiers, vintage radios, CRT televisions, and consumer power supplies.
- Discharges capacitors up to 600V in under 60 seconds (up to ~1200µF) - Adaptive discharge: controlled current above ~63 V (slow resistive path); fast dump below (MOSFET-switched). Switch point 55–83 V across Q1 hFE (25–300) and 0–60 °C corners; peak fast-dump current ≤ 1.6 A - Red LED danger indicator: ON above ~10V, OFF when safe — powered directly from the capacitor, no…
CapacitorDischarger 1S bill of materials (BOM)
39 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPSA42-FAI (onsemi, TME MPSA42-FAI) MPSA42 | TO-92_Inline_Wide | Q1 |
| 1 | STP10NK80Z (alt: STF7NM80, IXTP2N80) STP10NK80Z | TO-220-3_Vertical_LegsSpread_P5.08mm | Q2 |
| 2 | MKDS5/2-9.5 | TerminalBlock_Phoenix_MKDS-5-2-9.5_1x02_P9.52mm | J3, J4 |
| 1 | TE narrow flat pin header 2P (ComponentsDB) PM-128 input | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | XH LED cable | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | K104K10X7RF5UH5 100nF 50V | C_Disc_D5.0mm_W2.5mm_P5.00mm | C_byp2 |
| 1 | BZX55C8V2-TAP (Vishay, Mouser 78-BZX55C8V2-TAP) BZX55C8V2 | D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D_LED1 |
| 1 | 1N4007 (spare from the bridge batch, ComponentsDB) 1N4007 | D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp | D_clamp1 |
| 1 | 1N4007 (spare from the bridge batch, ComponentsDB) BZX55C8V2 | D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D_clamp2 |
| 1 | ESKA 1038820 (TME 1038820, in stock 2026-10-01; alt DF ELECTRIC 491602, Littelfuse KLKD002.T) — buy 2 (1 spare) 2A 1000VDC gR | Fuseholder_Clip-10.3x38mm_Schurter_CSO_0751.0506 | F1 |
| 9 | MF006FF1003A50 100k 0.6W | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R_LED1, R_LED2, R_LED3, R_LED4, R_sig1, R_sig2, R_sig3, R_sig4 +1 |
| 1 | 27J50RE (Ohmite, Mouser 588-27J50RE) 50R 7W | R_Axial_Ohmite_27J_7W_Vertical | R_fast1 |
| 2 | YAGEO MF0207FTE52-100R (TME MF0207FTE-100R; any 100 Ω 1% metal film fits) 100R 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R_sig_bot1, R_sig_bot2 |
| 5 | 45F4K7E (Ohmite, Mouser 588-45F4K7E) 4k7 5W | R_Axial_Ohmite_45F_5W_Vertical | R_slow1, R_slow2, R_slow3, R_slow4, R_slow5 |
| 1 | SCHOTT SEFUSE SF129R0 (TME SF129R0; alt AUPO BF133) — buy 2 (1 spare) SF129R0 133°C | ThermalCutoff_SEFUSE_SF_Vertical | TF1 |
| 4 | 1N4007 (Diotec, Mouser 637-1N4007) 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | BZX85C12 (onsemi, Mouser 512-BZX85C12) BZX85C12 | D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp | D9 |
| 1 | FMP300FRF73-1M (YAGEO, Mouser 603-FMP300FRF73-1M) 1M 3W | R_Axial_DIN0516_L15.5mm_D5.0mm_P10.16mm_Vertical_BodyOnPad2 | R1 |
| 2 | MFR-25FTE52-10K (YAGEO, Mouser 603-MFR-25FTE52-10K) 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3 |
| 1 | RN60D1000FB14 (Vishay, Mouser 71-RN60D-F-100) 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FMP300FRF73-470K (YAGEO, Mouser 603-FMP300FRF73-470K) 470k 3W | R_Axial_DIN0516_L15.5mm_D5.0mm_P10.16mm_Vertical_BodyOnPad2 | R5 |
CapacitorDischarger 1S design files
The KiCad project lives in the CatalinSerafimescu/CapacitorDischarger repository on GitHub; these links point at the commit this page was built from.
CapacitorDischarger 1S: common questions
How big is the CapacitorDischarger 1S PCB?
The CapacitorDischarger 1S measures 100 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CapacitorDischarger 1S?
39 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the CapacitorDischarger 1S design files?
From the CatalinSerafimescu/CapacitorDischarger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CapacitorDischarger 1S design in my own project?
The repository has no license, so all rights stay with CatalinSerafimescu. Use it as a reference, and ask the author before reusing the design.
More boards in CapacitorDischarger
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k