Flips9
About the Flips9 PCB
Flips9 is an open source PCB design by cawapy, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 51 components from 10 distinct parts.
Other key parts include the 74238, TD62783 and ULN2803. By type, the board carries 17 ICs, 16 jumpers, 12 capacitors and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
KiCad schematics and PCB for building flip dot display drivers
KiCad schematics and PCBs for building flip dot and flip segment display drivers.
The designs are not yet finalized or not fully tested.
PCBs of Flips5, Flips6 and Flips7, each in Version V1.0, have been manufactured and equiped.
Flips5, Flips6 and Flips7 can be considered working, at least in single display configurations. Successfully tested:
Flips5 with standard Brose displays on BROSE60 and BRDIC1, connected to Flips6 on CNY1+CNY2 and CNX1 28x16 (15 mm dots) 28x19 (10 mm dots) Flips5 with extended 28x24 (10 mm dots) Brose display on BROSE60+BROSE20 and BRDIC1, connected to Flips6 on…
Main components on the Flips9
Flips9 bill of materials (BOM)
51 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 74238 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U1, U11, U12, U21, U22, U31, U32, U41 +1 |
| 4 | TD62783 | DIP-18_W7.62mm_Socket | U13, U23, U33, U43 |
| 4 | ULN2803 | DIP-18_W7.62mm_Socket | U14, U24, U34, U44 |
| 1 | UFP2810 | Pin_Header_Angle_Shrouded_2x05_Pitch2.54mm_ConvNumbering | CN1 |
| 4 | Conn_02x08_Odd_Even | Pin_Header_Straight_Shrouded_Locks_2x08_Pitch2.54mm_ConvNumbering | CND1, CND2, CND-16, CND-162 |
| 1 | Conn_02x13_Odd_Even | Pin_Header_Straight_Shrouded_Locks_2x13_Pitch2.54mm_ConvNumbering | CND-24 |
| 16 | Jumper_NO_Small | SolderJumper1.3mmNoSilk | JP101, JP102, JP103, JP104, JP105, JP106, JP107, JP108 +8 |
| 9 | 0μ1 | C_0805_HandSoldering | C1, C11, C12, C21, C22, C31, C32, C41 +1 |
| 2 | 2m2 | CP_Radial_D13.0mm_P5.00mm | C2, C3 |
| 1 | 10µ | C_0805_HandSoldering | C4 |
Flips9 design files
The KiCad project lives in the cawapy/FlipSuite repository on GitHub; these links point at the commit this page was built from.
- LayoutFlips9/Flips9.kicad_pcb
Flips9: common questions
How big is the Flips9 PCB?
The Flips9 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flips9?
51 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flips9 design files?
From the cawapy/FlipSuite repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Flips9 design in my own project?
The repository has no license, so all rights stay with cawapy. Use it as a reference, and ask the author before reusing the design.
More boards in FlipSuite
Flips15
100 × 100 mm66 parts2LNo license3
Flips10Driver
21.6 × 41.3 mm43 parts2LNo license3
Flips 6
100 × 50 mm25 parts2LNo license3
Flips6a
90 × 50 mm24 parts2LNo license3
Flips8
100 × 100 mm21 parts2LNo license3
Flips6b
90 × 50 mm19 parts2LNo license3
Flips 7
100 × 100 mm16 parts2LNo license3
Flips6d
90 × 50 mm16 parts2LNo license3
Flips5
100 × 100 mm16 parts2LNo license3
Flips5Plus
80 × 75 mm7 parts2LNo license3
Flips 4
21 × 61.6 mm5 parts2LNo license3
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k