10 open source boards using the ULN2803
Real designs built with the ULN2803, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Itsy Robot Board
aspro648
31.8 × 58.4 mm27 parts2LNo license87ESP8266
Egaki
abierto-cc
55 × 110.1 mm73 parts2LNo license13STM32
Believotronics
Believotron
88.9 × 142.2 mm81 parts2LMIT8ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04AVR/Arduino
Main
qweqq
158.8 × 65.7 mm116 parts2LMIT1Jbt05-io extender-74hc595-uln2803-mosfet
jbteja
90 × 90 mm139 parts2LMIT0Hermes-Lite Basic RF Frontend
softerhardware
49.9 × 49.9 mm63 parts2LNo license64ESP8266
Escorna Ogaki CPU 1 0
abierto-cc
55 × 110.1 mm73 parts2LNo license13Flips9
cawapy
100 × 100 mm51 parts2LNo license3PIC
Pic32main
JuanPoueriet
160 × 120 mm98 parts6LNo license0
How designs wire the ULN2803
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ULN2803 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 9 | Connected to: GND 100% | — |
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Itsy Robot Board by aspro648, Hermes-Lite Basic RF Frontend by softerhardware, Egaki by abierto-cc and Believotronics by Believotron.
The ULN2803 in open source designs
The gallery holds 10 open source boards using the ULN2803 from 9 GitHub repositories; a typical one measures about 89.5 × 95 mm and carries around 77 components.
90% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Itsy Robot Board by aspro648.
Microcontrollers on boards using the ULN2803
What boards using the ULN2803 are built for
ULN2803: common questions
Where can I find a ULN2803 reference design?
Each of the 10 boards on this page is a real design using the ULN2803. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ULN2803 use?
Most are built on ESP8266 (2), AVR/Arduino (1), ESP32 (1) and PIC (1).
How big is a typical board using the ULN2803?
The median is 89.5 × 95 mm, and 90% are two-layer designs.
What is the most popular open source board using the ULN2803?
By GitHub stars, Itsy Robot Board by aspro648, with 87 stars.
Can I simulate one of these boards using the ULN2803 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.