Daly to lithium balance adapter
cepr·daly-to-lithium-balance-adapter·hardware/interface_board/interface_board.kicad_pcb
About the Daly to lithium balance adapter PCB
Daly to lithium balance adapter is an open source STM32 PCB design by cepr, published on GitHub. It is a 2-layer board measuring 160 × 100 mm, with 111 components from 41 distinct parts.
Its main chip is the STM32G0B1KET6, from the STM32 family. Other key parts include the R-78E5.0-0.5, TPS73633DBVR, THVD1450DR, MCP2562-E/SN and ISO7721DWVR. By type, the board carries 33 resistors, 30 capacitors, 17 connectors, 11 diodes, 9 ICs and 9 fuses.
It belongs with the power & battery designs in this gallery.
From the project
Replacement traction battery for a 2018 Energica Ego. The original Lithium Balance s-BMS master (BMCU) stays in the bike. The original cell-monitoring slave boards are gone, and a small microcontroller board takes their place.
Replacement traction battery for a 2018 Energica Ego. The original Lithium Balance s-BMS master (BMCU) stays in the bike. The original cell-monitoring slave boards are gone, and a small microcontroller board takes their place.
- BMS master: Lithium Balance s-BMS BMCU board (firmware 6.18.0, PIC18F4680). - Original slaves (LMUs): 10 Lithium Balance cell-monitor boards with 8 cells each (10 × 8 = 80 cells). They are no longer available. - Replacement: 4 DALY Smart Active Balancers: three 24S (the largest model) and one 20S for the top module. They balance the cells and measure every cell…
Main components on the Daly to lithium balance adapter
Daly to lithium balance adapter bill of materials (BOM)
111 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R-78E5.0-0.5 RECOM | Converter_DCDC_RECOM_R-78E-0.5_THT | U101 |
| 1 | TPS73633DBVR Texas Instruments | SOT-23-5 | U102 |
| 1 | STM32G0B1KET6 STMicroelectronics | LQFP-32_7x7mm_P0.8mm | U201 |
| 1 | THVD1450DR THVD1450D Texas Instruments | SOIC-8_3.9x4.9mm_P1.27mm | U301 |
| 1 | MCP2562-E/SN Microchip | SOIC-8_3.9x4.9mm_P1.27mm | U401 |
| 4 | ISO7721DWVR ISO7721DWV Texas Instruments | SOIC-8_7.5x5.85mm_P1.27mm | U601, U701, U801, U901 |
| 1 | 2N7002BKS,115 2N7002BKS Nexperia | SOT-363_SC-70-6 | Q2 |
| 1 | ASE-8.000MHZ-LC-T Abracon | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSoldering | X1 |
| 4 | SM06B-GHS-TB(LF)(SN) JST-GH JST | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J1, J2, J5, J6 |
| 1 | 0015247040 Molex 0015247040 Molex | Molex_0015247040 | J3 |
| 1 | N2510-6002-RB ST-LINK/V2 clone USB dongle 3M | IDC-Header_2x05_P2.54mm_Vertical | J11 |
| 1 | 0430450400 Molex 430450400 Molex | Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J13 |
| 5 | 0039301060 Molex 0039301060 Molex | Molex_Mini-Fit_Jr_5569-06A2_2x03_P4.20mm_Horizontal | J14, J15, J16, J17, J18 |
| 4 | 0430450202 Molex 430450202 Molex | Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal | J19, J20, J21, J22 |
| 1 | TSW-102-07-G-S DEBUG TX Samtec | PinHeader_2x01_P2.54mm_Vertical | J202 |
| 1 | 1812L050/30PR 0.5A hold, 30V Littelfuse | Fuse_1812_4532Metric | F101 |
| 8 | 0ZCF0200AF2C 2.0A hold, 4.0A trip, 24V Bel Fuse | Fuse_2920_7451Metric | F102, F103, F104, F105, F106, F107, F108, F109 |
| 2 | SMBJ18A Littelfuse | D_SMB_Handsoldering | D101, D104 |
| 1 | SSA34-E3/61T SS34 Vishay | D_SMA | D102 |
| 1 | APT2012SGC green Kingbright | LED_0805_2012Metric | D103 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APT2012SGC status Kingbright | LED_0805_2012Metric | D201 |
| 1 | SM712.TCT SM712 Semtech | SOT-23 | D301 |
| 1 | NUP2105LT1G NUP2105L onsemi | SOT-23 | D401 |
| 4 | BAV99-E3-08 BAV99 Vishay | SOT-23 | D501, D502, D503, D504 |
| 2 | EEE-FK1V470P 47uF / 35V Panasonic | CP_Elec_6.3x5.8 | C1, C2 |
| 1 | UMK325BJ106MM-T 10uF 50V Taiyo Yuden | C_1210_3225Metric | C101 |
| 1 | CC0805KRX7R9BB104 100nF 50V Yageo | C_0805_2012Metric | C102 |
| 1 | UMK325BJ106MM-T 10uF 16V Taiyo Yuden | C_1210_3225Metric | C103 |
| 6 | 08055C105KAT2A 1uF KYOCERA AVX | C_0805_2012Metric | C104, C105, C603, C703, C803, C903 |
| 17 | CC0805KRX7R9BB104 100nF Yageo | C_0805_2012Metric | C201, C203, C301, C401, C402, C501, C502, C503 +9 |
| 1 | C2012X5R1E475K125AB 4.7uF TDK | C_0805_2012Metric | C202 |
| 1 | CL21B472KBANNNC 4.7nF Samsung Electro-Mechanics | C_0805_2012Metric | C403 |
| 6 | RC0805FR-071KL 1k Yageo | R_0805_2012Metric | R101, R201, R502, R504, R506, R508 |
| 1 | RC0805FR-07100RL 100 Yageo | R_0805_2012Metric | R202 |
| 1 | RC0805FR-07100KL 100k Yageo | R_0805_2012Metric | R203 |
| 13 | RC0805FR-0710KL 10k Yageo | R_0805_2012Metric | R204, R205, R301, R303, R401, R601, R603, R604 +5 |
| 1 | RC0805JR-070RL 0 Yageo | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | R206 |
| 1 | RC0805FR-07120RL 120 Yageo | R_0805_2012Metric | R302 |
| 2 | RC0805FR-0760R4L 60.4 Yageo | R_0805_2012Metric | R402, R403 |
| 4 | RC0805FR-0710KL 10k 1% Yageo | R_0805_2012Metric | R501, R503, R505, R507 |
| 4 | RC0805FR-0710RL 10 Yageo | R_0805_2012Metric | R602, R702, R802, R902 |
Daly to lithium balance adapter design files
The KiCad project lives in the cepr/daly-to-lithium-balance-adapter repository on GitHub; these links point at the commit this page was built from.
Daly to lithium balance adapter: common questions
What microcontroller does the Daly to lithium balance adapter use?
The Daly to lithium balance adapter is built around the STM32G0B1KET6, from the STM32 family.
How big is the Daly to lithium balance adapter PCB?
The Daly to lithium balance adapter measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Daly to lithium balance adapter?
111 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Daly to lithium balance adapter design files?
From the cepr/daly-to-lithium-balance-adapter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Daly to lithium balance adapter design in my own project?
The repository has no license, so all rights stay with cepr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Daly to lithium balance adapter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k