8 open source boards using the THVD1450DR
Real designs built with the THVD1450DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Yeti Power Board
PionixPublic
163.5 × 123.5 mm259 parts8LCERN-OHL-P-2.068RP2040/RP2350
Digital clock72
marino222
44 × 44 mm46 parts4LMIT1ESP32
Vancontroller
Camperlux
230 × 135 mm247 parts4LCustom license0ESP32
Abx motion
levdan159
157 × 105 mm188 parts4LNo license0ESP32
ParkFlow
kgchord
100 × 80 mm145 parts2LNo license0Brain board
Batterhead221
99.5 × 92.3 mm119 parts4LMIT0STM32
Daly to lithium balance adapter
cepr
160 × 100 mm111 parts2LNo license0Rs485-interface
devkyber
50 × 35 mm9 parts2LNo license0
How designs wire the THVD1450DR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the THVD1450DR connects to, and the resistors, capacitors and other passives placed on it.
- The RE_2 pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ.
- The DE_3 pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ.
- The A_6 pin has a series resistor on 7 of 8 designs, most often 120 Ω (then 0 Ω).
- The B_7 pin has a series resistor on 5 of 8 designs, most often 120 Ω (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RE_2pin 2 | Connected to: The microcontroller 75% |
|
| DE_3pin 3 | Connected to: The microcontroller 75% |
|
| GND_5pin 5 | Connected to: GND 100% | — |
| A_6pin 6 | Connected to: A connector 88% |
|
| B_7pin 7 | Connected to: A connector 88% |
|
| VCC_8pin 8 | Connected to: 3.3V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Yeti Power Board by PionixPublic, Digital clock72 by marino222, Brain board by Batterhead221 and Vancontroller by Camperlux.
The THVD1450DR in open source designs
The gallery holds 8 open source boards using the THVD1450DR from 8 GitHub repositories; a typical one measures about 128.5 × 96.1 mm and carries around 132 components.
63% use four copper layers or more, and 38% carry an open source license.
The most starred is Yeti Power Board by PionixPublic.
Parts used alongside the THVD1450DR
Microcontrollers on boards using the THVD1450DR
What boards using the THVD1450DR are built for
THVD1450DR: common questions
Where can I find a THVD1450DR reference design?
Each of the 8 boards on this page is a real design using the THVD1450DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the THVD1450DR RE_2 pin?
The RE_2 pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the THVD1450DR.
What resistor goes on the THVD1450DR DE_3 pin?
The DE_3 pin has a resistor to GND on 7 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the THVD1450DR.
What resistor goes on the THVD1450DR A_6 pin?
The A_6 pin has a series resistor on 7 of 8 designs, most often 120 Ω (then 0 Ω). Counted from the KiCad layouts of 8 open source designs using the THVD1450DR.
Which microcontrollers do boards using the THVD1450DR use?
Most are built on ESP32 (3), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the THVD1450DR?
The median is 128.5 × 96.1 mm, and 38% are two-layer designs.
What is the most popular open source board using the THVD1450DR?
By GitHub stars, Yeti Power Board by PionixPublic, with 68 stars.
Can I simulate one of these boards using the THVD1450DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.