HardLabs

Rp2350 breakout

Charading·rp2350b-pico·rp2350_breakout/rp2350_breakout.kicad_pcb

Rp2350 breakout layout, top view — open source board by Charading

About the Rp2350 breakout

Rp2350 breakout is an open source PCB design by Charading, published on GitHub. It is a 2-layer board measuring 61 × 76.2 mm, with 8 components from 3 distinct parts.

By type, the board carries 6 connectors, 1 switch and 1 resistor.

It belongs with the dev boards & breakouts and displays & leds designs in this gallery.

From the project

I wanted a board similar to the rp2040 pico so i just designed my own, it's extended by two more pins, in order to break out a ton of gpio and also all 8 ADC pins

This is a custom RP2350B development board designed to match the Raspberry Pi Pico form factor. It keeps a similar form factor but is extended by a few pins, in order to break out all 8 analog gpio.

Designed for experimentation and easy migration from RP2040 to RP2350 as I wanted more analog pins for a project. Inspiration taken from pico-stretch by jvanderberg

Rp2350 breakout, from the project README
From the project README

Rp2350 breakout bill of materials (BOM)

8 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
CONN_01X32_MOUNTINGPIN
Conn_01x32_MountingPin
J1, J2, J3, J4, J5, J6
1
RUN
SW1
1
R
R1

Rp2350 breakout design files

The KiCad project lives in the Charading/rp2350b-pico repository on GitHub; these links point at the commit this page was built from.

Rp2350 breakout: common questions

How big is the Rp2350 breakout?

The Rp2350 breakout measures 61 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rp2350 breakout?

8 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rp2350 breakout design files?

From the Charading/rp2350b-pico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rp2350 breakout design in my own project?

The repository has no license, so all rights stay with Charading. Use it as a reference, and ask the author before reusing the design.

More boards in rp2350b-pico

Similar boards