Z3817a breakout
About the Z3817a breakout
Z3817a breakout is an open source PCB design by charlieh0tel, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 77.3 × 76.3 mm, with 26 components from 13 distinct parts.
Other key parts include the L78L05_SOT89. By type, the board carries 13 connectors, 5 resistors, 4 capacitors, 2 jumpers, 1 IC and 1 fuse.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Z3817a breakout
Z3817a breakout bill of materials (BOM)
26 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78L05_SOT89 | SOT-89-3 | U1 |
| 4 | Conn_Coaxial | SMA_Molex_73251-2200_Horizontal | J1, J10, J11, J12 |
| 6 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J4, J5, J6, J14, J15 |
| 2 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3, J13 |
| 1 | CONN_01X02 Conn_01x02 | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J8 |
| 1 | Polyfuse | Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1 |
| 2 | SOLDERJUMPER_2_BRIDGED SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0.33u 50V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0.1u 10V X7R | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22u 50V X7S | C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | C3 |
| 1 | DNI | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 2 | 33 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 3 | DNI | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5 |
Z3817a breakout design files
The KiCad project lives in the charlieh0tel/ee_stuff repository on GitHub; these links point at the commit this page was built from.
Z3817a breakout: common questions
How big is the Z3817a breakout?
The Z3817a breakout measures 77.3 × 76.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Z3817a breakout?
26 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Z3817a breakout design files?
From the charlieh0tel/ee_stuff repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Z3817a breakout design in my own project?
Yes, under the terms of its BSD-3-Clause license, which charlieh0tel chose for the repository.
More boards in ee_stuff
Rpi sa8x8hat
65 × 56.5 mm67 parts4LBSD-3-Clause0
Pdp11 front panel
64 × 48.9 mm52 parts2LBSD-3-Clause0
Ddf big array panel
236 × 118 mm45 parts4LBSD-3-Clause0
Magloop preamp
49 × 40 mm35 parts2LBSD-3-Clause0
9v iso
60 × 38 mm10 parts2LBSD-3-Clause0
Lora nicerf hat
65 × 30.5 mm9 parts4LBSD-3-Clause0
12v smps
6 × 5.4 mm7 parts6LBSD-3-Clause0
Iso xfmr
76.2 × 50.8 mm7 parts2LBSD-3-Clause0
Magloop coupler
26 × 12 mm6 parts2LBSD-3-Clause0
Tos
3 parts2LBSD-3-Clause0
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446