HardLabs

EMBEDDED-Sedentary-Detector-ESP32

chenweidu666·EMBEDDED-Sedentary-Detector-ESP32·hardware/kicad/SedentaryDetector.kicad_pcb

EMBEDDED-Sedentary-Detector-ESP32 PCB layout, top view — open source ESP32 board by chenweidu666

About the EMBEDDED-Sedentary-Detector-ESP32 PCB

EMBEDDED-Sedentary-Detector-ESP32 is an open source ESP32 PCB design by chenweidu666, published on GitHub. It is a 2-layer board measuring 54.5 × 69 mm, with 8 components from 5 distinct parts.

Its main chip is the ESP32_2x15, from the ESP32 family.

It belongs with the iot & wireless designs in this gallery.

From the project

基于 ESP32-C3 + MPU6050 的久坐检测器 · PCB 载板 + 开发板插接

基于 ESP32-WROOM-32 + GY-87（MPU6050）+ OLED 的椅子久坐检测器载板方案。本仓库仅保留硬件（BOM、接线、KiCad）；固件与联调在独立项目中完成。

策略：现成模块 + 定制载板 PCB 插接互连；PM11 锂电包供电（USB 充电，模块自带开关）。

载板布线节奏：KiCad 已完成原理图、布局与网络分配；PCB 尚未布线。固件与算法仍在 03 / 04 中联调，接口与引脚稳定后再走线、DRC、打样，避免返工。

EMBEDDED-Sedentary-Detector-ESP32 bill of materials (BOM)

8 components, 5 distinct parts.

QtyPartRefs
1
ESP32_2x15
J1
1
GY-87
J2
1
POWER_2P
J3
1
OLED_0.96
J4
4
—
MH1, MH2, MH3, MH4

EMBEDDED-Sedentary-Detector-ESP32 design files

The KiCad project lives in the chenweidu666/EMBEDDED-Sedentary-Detector-ESP32 repository on GitHub; these links point at the commit this page was built from.

EMBEDDED-Sedentary-Detector-ESP32: common questions

What microcontroller does the EMBEDDED-Sedentary-Detector-ESP32 use?

The EMBEDDED-Sedentary-Detector-ESP32 is built around the ESP32_2x15, from the ESP32 family.

How big is the EMBEDDED-Sedentary-Detector-ESP32 PCB?

The EMBEDDED-Sedentary-Detector-ESP32 measures 54.5 × 69 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EMBEDDED-Sedentary-Detector-ESP32?

8 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the EMBEDDED-Sedentary-Detector-ESP32 design files?

From the chenweidu666/EMBEDDED-Sedentary-Detector-ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the EMBEDDED-Sedentary-Detector-ESP32 design in my own project?

The repository has no license, so all rights stay with chenweidu666. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EMBEDDED-Sedentary-Detector-ESP32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards