Adaptor
cheyao·ch32-logic-analyzer·adaptor/adaptor.kicad_pcb
About the Adaptor PCB
Adaptor is an open source PCB design by cheyao, published on GitHub under the SHL-2.1 license. It is a 2-layer board measuring 14 × 49.5 mm, with 4 components from 4 distinct parts.
It belongs with the test & measurement and dev boards & breakouts designs in this gallery.
From the project
200MHz USB 3.1 logic analyzer and 20MHz ADC w/ pulseview
This is a cheap 200Msps logic analyzer with a 20Msps analog component. It uses USB 3.2 to send data to the computer, and can also act as a ch32h417 development board.
It is usable with pulseview delivering a beautiful interface and allowing you to view all kinds of diffrent protocols. And with voltage changing, it supports 1.2V, 3.3V and 5V opration modes.
The analog channels support 20Msps at 10bit accuracy, or 5MHz at 12bit accuracy. Input range is from 0V to 5V, and it supports external triggering too!

Adaptor bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | Edge_1.27mm_02x04 | J1 |
| 1 | CONN_02X20 Conn_02x20 | Edge_1.27mm_02x20 | J2 |
| 1 | CONN_02X20 Conn_02x20 | Edge_2.54mm_02x20 | J3 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | Edge_2.54mm_02x04 | J4 |
Adaptor design files
The KiCad project lives in the cheyao/ch32-logic-analyzer repository on GitHub; these links point at the commit this page was built from.
Adaptor: common questions
How big is the Adaptor PCB?
The Adaptor measures 14 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adaptor?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adaptor design files?
From the cheyao/ch32-logic-analyzer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Adaptor design in my own project?
It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.
More boards in ch32-logic-analyzer
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k