Acro
chickadee-tech·acro·pcb/acro.kicad_pcb
About the Acro PCB
Acro is an open source PCB design by chickadee-tech, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 36 × 36 mm, with 21 components from 18 distinct parts.
Other key parts include the MPU-6500 and TLV70233DBV. By type, the board carries 5 capacitors, 2 ICs, 2 resistors, 1 transistor, 1 connector and 1 diode.
From the project
MPU-6500 Polystack Mod
You may also license the Polystack logo for free by emailing support@chickadee.tech. We'll ask for your gerbers to ensure the design complies with specifications laid out here and provide written permission to use the trademark after compliance has been demonstrated.
Main components on the Acro
Acro bill of materials (BOM)
21 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU-6500 | QFN-24-1EP_3x3mm_Pitch0.4mm | U1 |
| 1 | TLV70233DBV | SOT-23-5 | U2 |
| 1 | Q_NMOS_GSD | SOT-23_Handsoldering | Q1 |
| 1 | CONN_01X02 | Pin_Header_Angled_1x02 | P1 |
| 1 | SN74LVC1G0832 | SC-70-6_Handsoldering | PORT_ANDOR1 |
| 1 | 0.1uF | C_0603_HandSoldering | PORT_C1 |
| 1 | AT24CS02-MAHM | DFN-8-1EP_3x2mm_Pitch0.5mm | PORT_IC1 |
| 1 | CKD_SANDWICH | DF40-80pin-Header | PORT_IN1 |
| 2 | SN74LVC1G58 | SC-70-6_Handsoldering | PORT_INV1, PORT_XOR1 |
| 1 | CKD_SANDWICH | DF40-3-4mm-80pin-Receptacle | PORT_OUT1 |
| 1 | CONN_01X01 | Measurement_Point_Round-SMD-Pad_Small | PORT_P1 |
| 1 | 10k | R_0603_HandSoldering | PORT_R1 |
| 1 | LED | LED-0603 | D1 |
| 1 | 10nF | C_0603_HandSoldering | C1 |
| 2 | 0.1uF | C_0603_HandSoldering | C2, C3 |
| 2 | 1uF | C_0603_HandSoldering | C4, C5 |
| 1 | 100k | R_0603_HandSoldering | R1 |
| 1 | 1k | R_0603_HandSoldering | R2 |
Acro design files
The KiCad project lives in the chickadee-tech/acro repository on GitHub; these links point at the commit this page was built from.
Acro: common questions
How big is the Acro PCB?
The Acro measures 36 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Acro?
21 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Acro design files?
From the chickadee-tech/acro repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Acro design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which chickadee-tech chose for the repository.