9 open source boards using the TLV70233DBV

Real designs built with the TLV70233DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TLV70233DBV

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TLV70233DBV connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 100 nF).
  • Pin 3 has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 100 nF).
  • Pin 5 has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 4.7 µF).
  • Pin 2 is tied to GND on 8 of 8 designs.
Pin 1Connected to: 5V 63% · a signal 38%
  • Decoupling capacitor on 100% · 1 µF (2), 100 nF (1), 10 µF (1)
Pin 2Connected to: GND 100%
Pin 3Connected to: 5V 63% · a signal 38%
  • Decoupling capacitor on 100% · 1 µF (2), 100 nF (1), 10 µF (1)
Pin 4Connected to: Not connected 88%
Pin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 1 µF (3), 4.7 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IBM-ModelM-101 by idpromnut, F3fc by chickadee-tech, F4fc by chickadee-tech and Mod12003 by semianalog.

The TLV70233DBV in open source designs

The gallery holds 9 open source boards using the TLV70233DBV from 8 GitHub repositories; a typical one measures about 36 × 36 mm and carries around 49 components.

67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is IBM-ModelM-101 by idpromnut.

Parts used alongside the TLV70233DBV

Microcontrollers on boards using the TLV70233DBV

What boards using the TLV70233DBV are built for

TLV70233DBV: common questions

Where can I find a TLV70233DBV reference design?

Each of the 9 boards on this page is a real design using the TLV70233DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TLV70233DBV pin 1?

Pin 1 has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TLV70233DBV.

What decoupling capacitors do designs use on the TLV70233DBV pin 3?

Pin 3 has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TLV70233DBV.

What decoupling capacitors do designs use on the TLV70233DBV pin 5?

Pin 5 has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the TLV70233DBV.

Which microcontrollers do boards using the TLV70233DBV use?

Most are built on STM32 (5), AVR/Arduino (1) and Microchip SAM (1).

How big is a typical board using the TLV70233DBV?

The median is 36 × 36 mm, and 67% are two-layer designs.

What is the most popular open source board using the TLV70233DBV?

By GitHub stars, IBM-ModelM-101 by idpromnut, with 15 stars.

Can I simulate one of these boards using the TLV70233DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part