QuickAccessBoard
Chicken-Slayer·QuickAccessBoard·PCB/QuickAccessBoard.kicad_pcb
About the QuickAccessBoard PCB
QuickAccessBoard is an open source PCB design by Chicken-Slayer, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 81 mm, with 27 components from 5 distinct parts.
Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 13 switches, 12 diodes, 1 IC and 1 connector.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
It has two separate printed pieces: the base, and the top cover.
It has two separate printed pieces: the base, and the top cover.
It can be easily modified to accomodate other macros and the OLED display image can also be easily swapped out for another, or even an animation quite easily.
2. Long press the "BOOT" button on the microcontroller. Connect the microcontroller to your device while still holding down the button.
3. Flash CircuitPython on to the XIAO RP2040, by downloading the required .uf2 file from the official CircuitPython website and moving it to the disk driver that will appear on your device.
Main components on the QuickAccessBoard
QuickAccessBoard bill of materials (BOM)
27 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOUDLE-SEEEDUINO-XIAO | XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | OLED Display | SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 12 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW13 |
| 12 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
QuickAccessBoard design files
The KiCad project lives in the Chicken-Slayer/QuickAccessBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/QuickAccessBoard.kicad_pcb
- SchematicPCB/QuickAccessBoard.kicad_sch
QuickAccessBoard: common questions
How big is the QuickAccessBoard PCB?
The QuickAccessBoard measures 90 × 81 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QuickAccessBoard?
27 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the QuickAccessBoard design files?
From the Chicken-Slayer/QuickAccessBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the QuickAccessBoard design in my own project?
Yes, under the terms of its MIT license, which Chicken-Slayer chose for the repository.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kAnyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kSwitch
byrantech
18.5 × 11.1 mm5 parts2LMIT4.3k