Vgc zero hardware

chili-chip·vgc-zero-hardware

Vgc zero hardware PCB layout, top view — open source RP2040/RP2350 board by chili-chip

About the Vgc zero hardware PCB

Vgc zero hardware is an open source RP2040/RP2350 PCB design by chili-chip, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 100 mm, with 8 components from 8 distinct parts.

Its main chip is the RP2350-Plus, from the RP2040/RP2350 family. Other key parts include the AUDIO_MODULE, RADIO_MODULE, DISPLAY_MODULE, BUTTONS_MODULE and UTILITY_MODULE. By type, the board carries 6 ICs and 2 resistors.

It belongs with the audio, iot & wireless and rf & radio designs in this gallery.

From the project

KiCad project for vgc zero.

KiCad 10 project for the main board of chilichip's open hardware keychain game console, the VGC Zero. A Waveshare RP2350-Plus runs the console and charges its LiPo; the display, buttons, audio and Wi-Fi/Bluetooth are modules that solder or plug onto this board. Firmware and games are built with the chili-chip 32blit SDK (board chilichipvgc`).

Current revision: v3.0.0. The schematic (vgc-zero.kicadsch`) is the source of truth for everything below.

Vgc zero hardware, from the project README
From the project README

Main components on the Vgc zero hardware

RP2350-PlusAUDIO_MODULERADIO_MODULEDISPLAY_MODULEBUTTONS_MODULEUTILITY_MODULE

Vgc zero hardware bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2350-Plus
U1
1
AUDIO_MODULE
U2
1
RADIO_MODULE
U3
1
DISPLAY_MODULE
U4
1
BUTTONS_MODULE
U5
1
UTILITY_MODULE
U6
1
470
R2
1
10k
R3

Vgc zero hardware design files

The KiCad project lives in the chili-chip/vgc-zero-hardware repository on GitHub; these links point at the commit this page was built from.

Vgc zero hardware: common questions

What microcontroller does the Vgc zero hardware use?

The Vgc zero hardware is built around the RP2350-Plus, from the RP2040/RP2350 family.

How big is the Vgc zero hardware PCB?

The Vgc zero hardware measures 50 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vgc zero hardware?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vgc zero hardware design files?

From the chili-chip/vgc-zero-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vgc zero hardware design in my own project?

Yes, under the terms of its MIT license, which chili-chip chose for the repository.

Can I test firmware for the Vgc zero hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards