HardLabs

PCB-Keyboard and-Mouse

Chloe-Can-Code·PCB-Keyboard-and-Mouse·KiCAD/Keyboard_mouse.kicad_pcb

PCB-Keyboard and-Mouse layout, top view — open source AVR/Arduino board by Chloe-Can-Code

About the PCB-Keyboard and-Mouse

PCB-Keyboard and-Mouse is an open source AVR/Arduino PCB design by Chloe-Can-Code, published on GitHub. It is a 2-layer board measuring 127 × 91.4 mm, with 46 components from 5 distinct parts.

Its main chip is the Arduino_Pro_Micro, from the AVR/Arduino family. By type, the board carries 42 switches, 1 module, 1 diode and 1 resistor.

It belongs with the keyboards designs in this gallery.

Main components on the PCB-Keyboard and-Mouse

Arduino_Pro_Micro

PCB-Keyboard and-Mouse bill of materials (BOM)

46 components, 5 distinct parts.

QtyPartRefs
1
Arduino_Pro_Micro
A1
42
SW_Push_Dual
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +34
1
Joystick
VR1
1
LED
D1
1
1.5k
R1

PCB-Keyboard and-Mouse design files

The KiCad project lives in the Chloe-Can-Code/PCB-Keyboard-and-Mouse repository on GitHub; these links point at the commit this page was built from.

PCB-Keyboard and-Mouse: common questions

What microcontroller does the PCB-Keyboard and-Mouse use?

The PCB-Keyboard and-Mouse is built around the Arduino_Pro_Micro, from the AVR/Arduino family.

How big is the PCB-Keyboard and-Mouse?

The PCB-Keyboard and-Mouse measures 127 × 91.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-Keyboard and-Mouse?

46 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB-Keyboard and-Mouse design files?

From the Chloe-Can-Code/PCB-Keyboard-and-Mouse repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB-Keyboard and-Mouse design in my own project?

The repository has no license, so all rights stay with Chloe-Can-Code. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-Keyboard and-Mouse without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards