Display
Choccy-vr·BeanBike·PCB/BeanBike/Display/Display.kicad_pcb
About the Display PCB
Display is an open source PCB design by Choccy-vr, published on GitHub. It is a 2-layer board measuring 51.8 × 39.5 mm, with 12 components from 11 distinct parts.
Other key parts include the MCP2515-XSO and SN65HVD230DR. By type, the board carries 5 connectors, 2 ICs, 2 capacitors, 2 resistors and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
A DIY eBike display and controller.
A DIY smart eBike display and controller.
I made this because I really like eBikes; they are just fun. I have always wanted my own, but off the shelf they are way too expensive. So I thought of going the custom route, making my own controller. But then I thought, if I am really going to do this, I am not going to get some normal boring eBike I want my eBike. And that is how this came to be.

Main components on the Display
Display bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2515-XSO MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | SN65HVD230DR | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U2 |
| 1 | X49SM8MSD2SC | CRYSTAL-SMD_L11.5-W4.8-LS12.7 | X1 |
| 1 | Pi 0 2W | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Power Conn | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Data Conn | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | GPS/DEBUG | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Display Conn | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 2 | 30PF 30pF | C_0402_1005Metric | C14, C15 |
| 1 | 10K 10k | R_0805_2012Metric | R1 |
| 1 | 120 | R_0805_2012Metric | R14 |
Display design files
The KiCad project lives in the Choccy-vr/BeanBike repository on GitHub; these links point at the commit this page was built from.
Display: common questions
How big is the Display PCB?
The Display measures 51.8 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Display?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Display design files?
From the Choccy-vr/BeanBike repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Display design in my own project?
The repository has no license, so all rights stay with Choccy-vr. Use it as a reference, and ask the author before reusing the design.
More boards in BeanBike
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k