SojournerST-hardware
ckoern·SojournerST-hardware·SojournerST/SojournerST.kicad_pcb
About the SojournerST-hardware PCB
SojournerST-hardware is an open source STM32 PCB design by ckoern, published on GitHub under the MIT license. It is a 4-layer board measuring 57.2 × 22.9 mm, with 33 components from 21 distinct parts.
Its main chip is the STM32G441KBTx, from the STM32 family. Other key parts include the LM1117-3.3, TB6612FNG and USBLC6-2SC6. By type, the board carries 12 capacitors, 7 connectors, 5 resistors, 4 ICs, 3 diodes and 1 crystal.
It belongs with the robotics & motion designs in this gallery.
From the project
KiCad project for the SojournerST closed-loop Motor Driver Board
The board is based on the TB6612 motor driver IC controlled via an STM32G441 (F4 should work as well) microcontroller and is designed to fit into a breadboard but also provides mounting holes to integrate it into a custom platform.
The controller uses quadrature encoder input to provide closed-loop PWM control to the driver IC. Power can either be supplied via USB to supply both logic and driver voltage or via a 3V3 logic and a motor voltage input (max. 15V).

Main components on the SojournerST-hardware
SojournerST-hardware bill of materials (BOM)
33 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G441KBTx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | LM1117-3.3 | SOT-23 | U2 |
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | Crystal | Crystal_HC49-4H_Vertical | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | PinHeader_2x03_P2.54mm_Vertical | J4 |
| 2 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J5, J6 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | SW_MEC_5E | SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | D | D_SMA | D1 |
| 2 | LED | LED_0603_1608Metric | D2, D3 |
| 1 | 4.7u | C_0805_2012Metric | C1 |
| 5 | 100n | C_0603_1608Metric | C2, C3, C5, C10, C12 |
| 2 | 1u | C_0805_2012Metric | C4, C6 |
| 2 | 10p | C_0603_1608Metric | C7, C9 |
| 2 | 10u | C_0805_2012Metric | C8, C11 |
| 3 | 10k | R_0603_1608Metric | R1, R2, R3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 330 | R_0603_1608Metric | R4, R5 |
SojournerST-hardware design files
The KiCad project lives in the ckoern/SojournerST-hardware repository on GitHub; these links point at the commit this page was built from.
SojournerST-hardware: common questions
What microcontroller does the SojournerST-hardware use?
The SojournerST-hardware is built around the STM32G441KBTx, from the STM32 family.
How big is the SojournerST-hardware PCB?
The SojournerST-hardware measures 57.2 × 22.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SojournerST-hardware?
33 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the SojournerST-hardware design files?
From the ckoern/SojournerST-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SojournerST-hardware design in my own project?
Yes, under the terms of its MIT license, which ckoern chose for the repository.
Can I test firmware for the SojournerST-hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k