Cmiv stm32f103

CM-IV·cmiv-stm32f103

Cmiv stm32f103 PCB layout, top view — open source STM32 board by CM-IV

About the Cmiv stm32f103 PCB

Cmiv stm32f103 is an open source STM32 PCB design by CM-IV, published on GitHub. It is a 2-layer board measuring 49 × 34 mm, with 27 components from 14 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 diode.

It belongs with the dev boards & breakouts, power & battery and sensors designs in this gallery.

From the project

KiCAD 9 schematics and board layout files for my custom STM32 PCB

A few months ago, my embedded systems experience was limited to collecting temperature and accelerometer data on an ESP32-C3 dev board using Rust. Coming from a computer science background, I had written plenty of C++ code and JavaScript in my first jobs out of college, but aside from school studies I didn't know much about the hardware side of things. I noticed the ESP32-C3-DevKit-RUST-1 dev board and decided try it out, but working with pre-built development boards only showed me half the picture.

Cmiv stm32f103, from the project README
From the project README

Main components on the Cmiv stm32f103

Cmiv stm32f103 bill of materials (BOM)

27 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
16MHZ
16MHz
Y1
4
CONN_01X04_PIN
Conn_01x04_Pin
J2, J3, J4, J5
1
RED
D1
1
120R
FB1
5
100N
100n
C1, C2, C3, C4, C9
1
10U
10u
C5
1
10N
10n
C6
2
1u
C7, C8
2
10P
10p
C10, C11
2
22U
22u
C12, C13
1
10K
10k
R1
4
1K5
1k5
R2, R3, R4, R5

Cmiv stm32f103 design files

The KiCad project lives in the CM-IV/cmiv-stm32f103 repository on GitHub; these links point at the commit this page was built from.

Cmiv stm32f103: common questions

What microcontroller does the Cmiv stm32f103 use?

The Cmiv stm32f103 is built around the STM32F103C8T6, from the STM32 family.

How big is the Cmiv stm32f103 PCB?

The Cmiv stm32f103 measures 49 × 34 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cmiv stm32f103?

27 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cmiv stm32f103 design files?

From the CM-IV/cmiv-stm32f103 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cmiv stm32f103 design in my own project?

The repository has no license, so all rights stay with CM-IV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cmiv stm32f103 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards