Subsystem SPI Breakout v4
About the Subsystem SPI Breakout v4
Subsystem SPI Breakout v4 is an open source PCB design by cmsc-stageworks, published on GitHub. It is a 2-layer board measuring 85.8 × 53.3 mm, with 33 components from 10 distinct parts.
By type, the board carries 19 resistors, 2 ICs, 1 speaker and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 2 earlier revisions of it.
Subsystem SPI Breakout v4 bill of materials (BOM)
33 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | T_IRQ | U1 |
| 1 | ~ | 2.8__TFT_SPI_ILI9341_WITH_SD_CARD | U2 |
| 1 | NPN transistor | TO-92_Inline | Amplifying Transistor1 |
| 1 | ~ | Small_Potentiometer | Brightness Adjust1 |
| 8 | BS170 | TO-92_Inline | CS_SD1, CS_TFT1, CS_Touch1, DC1, MISO1, MOSI1, RESET1, SCK1 |
| 1 | Speaker | TerminalBlock_bornier-2_P5.08mm | LS1 |
| 1 | ~ | SPI_HEADER_RIBBON_CONNECTOR_V2 | C1 |
| 17 | 10k Ω | THROUGH_HOLE_RESISTOR | R1, R2, R3, R4, R5, R6, R8, R10 +9 |
| 1 | 10 Ω | THROUGH_HOLE_RESISTOR | R7 |
| 1 | 100 Ω | THROUGH_HOLE_RESISTOR | R9 |
Subsystem SPI Breakout v4 design files
The KiCad project lives in the cmsc-stageworks/Subsystem-Panels-Documentation-and-Source-Code repository on GitHub; these links point at the commit this page was built from.
Subsystem SPI Breakout v4: common questions
How big is the Subsystem SPI Breakout v4?
The Subsystem SPI Breakout v4 measures 85.8 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Subsystem SPI Breakout v4?
33 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Subsystem SPI Breakout v4 design files?
From the cmsc-stageworks/Subsystem-Panels-Documentation-and-Source-Code repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Subsystem SPI Breakout v4 design in my own project?
The repository has no license, so all rights stay with cmsc-stageworks. Use it as a reference, and ask the author before reusing the design.
More boards in Subsystem-Panels-Documentation-and-Source-Code
Earlier revisions in the repo: Subsystem SPI Breakout v3, Subsystem SPI Breakout v2
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979