HardLabs

Tartan Artibeus Control Board

CMUAbstract·tartan-artibeus-hw·ta-ctrl/kicad/ta-ctrl.kicad_pcb

Tartan Artibeus Control Board layout, top view — open source TI MSP430/CC board by CMUAbstract
Simulate this board

About the Tartan Artibeus Control Board

Tartan Artibeus Control Board is an open source TI MSP430/CC PCB design by CMUAbstract, published on GitHub. It is a 4-layer board measuring 45 × 45 mm, with 49 components from 19 distinct parts.

Its main chip is the MSP430FR5994IPMR, from the TI MSP430/CC family. Other key parts include the LSF0204QPWRQ1, LSM9DS1TR and HT-GPS200.20. By type, the board carries 21 resistors, 13 capacitors, 6 ICs, 6 connectors, 2 crystals and 1 diode.

From the project

Tartan Artibeus hardware

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Main components on the Tartan Artibeus Control Board

LSF0204QPWRQ1LSM9DS1TRHT-GPS200.20MSP430FR5994IPMR

Tartan Artibeus Control Board bill of materials (BOM)

49 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
LSF0204QPWRQ1
LSF0204
Digikey
U1, U2, U3
1
LSM9DS1TR
LSM9DS1
Digikey
U4
1
HT-GPS200.20
U5
1
MSP430FR5994IPMR
MSP430FR5994IPM
Digikey
U6
1
ECS-.327-6-34QCS
32.768kHz
Mouser
Y1
1
ECS-240-10-47Q-CES
24MHz
Mouser
Y2
2
PINSOCKET_16_CTRL
PinSocket_16_ctrl
J1, J2
2
PINSOCKET_4_CTRL
PinSocket_4_ctrl
J4, J5
1
PINSOCKET_5_CTRL
PinSocket_5_ctrl
J6
1
PINSOCKET_5_CTRL
PinSocket_5_ctrl
J7
1
1727-1671-1
3.3V
Digikey
D1
1
C0603C103F3GACTU
10nF
Digikey
C1
5
C0603C104K8RACAUTO
100nF
Digikey
C2, C4, C8, C10, C12
2
C1608X7S0J106M080AC
10uF
Digikey
C3, C6
1
C0603C225K8RACTU
2.2uF
Digikey
C5
2
GRM1555C1H8R0DA01D
8pF
Digikey
C7, C9
2
GJM1555C1H4R0BB01D
4pF
Digikey
C11, C13
17
DNP
R1, R2, R3, R4, R5, R6, R7, R8 +9
4
CRCW060310K0FKEAHP
10k
Digikey
R13, R14, R15, R17

Tartan Artibeus Control Board design files

The KiCad project lives in the CMUAbstract/tartan-artibeus-hw repository on GitHub; these links point at the commit this page was built from.

Tartan Artibeus Control Board: common questions

What microcontroller does the Tartan Artibeus Control Board use?

The Tartan Artibeus Control Board is built around the MSP430FR5994IPMR, from the TI MSP430/CC family.

How big is the Tartan Artibeus Control Board?

The Tartan Artibeus Control Board measures 45 × 45 mm, has 4 copper layers and is 1.742 mm thick.

How many components are on the Tartan Artibeus Control Board?

49 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tartan Artibeus Control Board design files?

From the CMUAbstract/tartan-artibeus-hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Tartan Artibeus Control Board design in my own project?

The repository has no license, so all rights stay with CMUAbstract. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tartan Artibeus Control Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

More boards in tartan-artibeus-hw

Similar boards