EchoCane

cn108·EchoCane·hardware/kicad/EchoCane.kicad_pcb

EchoCane PCB layout, top view — open source AVR/Arduino board by cn108

About the EchoCane PCB

EchoCane is an open source AVR/Arduino PCB design by cn108, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 85 mm, with 15 components from 14 distinct parts.

Its main chip is the Arduino Nano v3.x, from the AVR/Arduino family. By type, the board carries 4 resistors, 3 capacitors, 2 connectors, 2 diodes, 1 module and 1 transistor.

It belongs with the sensors, dev boards & breakouts and audio designs in this gallery.

From the project

Embedded assistive-technology prototype: Arduino Nano firmware, HC-SR04 sensing, haptic/audio feedback, KiCad schematic and PCB, manufacturing outputs, simulation and verification evidence.

A safety-first embedded systems project: portable C++ policy core, Arduino Nano firmware, HC-SR04 sensing, PWM haptic drive, KiCad hardware and a documented verification trail.

EchoCane is an experimental supplementary mobility aid that measures the distance to the nearest surface with an HC-SR04 ultrasonic sensor and gives graded tactile and audible warnings. This repository reconstructs the concept as a complete, testable embedded-engineering portfolio project: portable C++ policy code, Arduino Nano firmware, Wokwi simulation assets, native unit tests, a KiCad carrier board, manufacturing…

EchoCane, from the project README
From the project README

Main components on the EchoCane

EchoCane bill of materials (BOM)

15 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino Nano v3.x
A1
1
PN2222A
Q1
1
HC-SR04
J1
1
Vibration motor
J2
1
Buzzer
BZ1
1
MODE
SW1
1
1N4007
D1
1
Green
D2
2
100NF
100nF
C1, C3
1
10UF
10uF
C2
1
270
R1
1
10K
10k
R2
1
220
R3
1
100
R4

EchoCane design files

The KiCad project lives in the cn108/EchoCane repository on GitHub; these links point at the commit this page was built from.

EchoCane: common questions

What microcontroller does the EchoCane use?

The EchoCane is built around the Arduino Nano v3.x, from the AVR/Arduino family.

How big is the EchoCane PCB?

The EchoCane measures 100 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EchoCane?

15 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EchoCane design files?

From the cn108/EchoCane repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EchoCane design in my own project?

Yes, under the terms of its MIT license, which cn108 chose for the repository.

Can I test firmware for the EchoCane without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards