Usb minecraft
cnlohr·avrcraft·usb_minecraft/hw/usb_minecraft.kicad_pcb
About the Usb minecraft PCB
Usb minecraft is an open source AVR/Arduino PCB design by cnlohr, published on GitHub. It is a 2-layer board measuring 12 × 16.5 mm, with 9 components from 9 distinct parts.
Its main chip is the ATMEGAXU2, from the AVR/Arduino family. Other key parts include the 10p, 1u and 33. By type, the board carries 4 ICs, 2 connectors, 1 crystal, 1 diode and 1 resistor.
From the project
Minecraft server optimized for 8-bit devices.
IT IS NOT INTENDED AS A LEGITIMATE SOLUTION AND CRASHES ALL THE TIME.
There's a reason I called my modded TCP stack "tcp_awful." It actually drops packets!
But, I did it, I shoehorned a full Minecraft server down to under 1k RAM, using a USB RNDIS Ethernet driver from LUFA.
IP is 192.168.55.243:25565... It totally works.
Boy it would be nice to know what's causing most of these errors!!
Main components on the Usb minecraft
Usb minecraft bill of materials (BOM)
9 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGAXU2 | QFN32 | U1 |
| 1 | 10p | NETWORK0606 | U2 |
| 1 | 1u | NETWORK1206 | U3 |
| 1 | 33 | NETWORK0606 | U4 |
| 1 | 16MHz | XTAL4P | X1 |
| 1 | AVRISP6 | SMTEDGE6 | J1 |
| 1 | USB | USBPCB | P1 |
| 1 | LED | SM0805 | D1 |
| 1 | 3.3k | SM0805 | R5 |
Usb minecraft design files
The KiCad project lives in the cnlohr/avrcraft repository on GitHub; these links point at the commit this page was built from.
Usb minecraft: common questions
What microcontroller does the Usb minecraft use?
The Usb minecraft is built around the ATMEGAXU2, from the AVR/Arduino family.
How big is the Usb minecraft PCB?
The Usb minecraft measures 12 × 16.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb minecraft?
9 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb minecraft design files?
From the cnlohr/avrcraft repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Usb minecraft design in my own project?
The repository has no license, so all rights stay with cnlohr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Usb minecraft without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in avrcraft
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k