HardLabs

AD8338 VGA

cnoikonom·Development_of_an_Electronic_System_for_High-Speed_Data_Acquisition_from_an_Optoelectronic_System·KiCad Designs/AD8338_VGA - Readout Unit/AD8338_VGA.kicad_pcb

AD8338 VGA PCB layout, top view — open source board by cnoikonom

About the AD8338 VGA PCB

AD8338 VGA is an open source PCB design by cnoikonom, published on GitHub under the MIT license. It is a 4-layer board measuring 79.3 × 47.5 mm, with 56 components from 30 distinct parts.

Other key parts include the AD8338ACPZ-R7, ADC12040CIVY, CD74ACT541M96E4, SN74LVC1G14DCKRE4 and REF196GRUZ-REEL7. By type, the board carries 12 capacitors, 9 ICs, 7 resistors, 5 connectors and 1 crystal.

It belongs with the test & measurement designs in this gallery.

From the project

This repository contains the full hardware and firmware implementation of my thesis at the Aristotle University of Thessaloniki, School of Electrical and Computer Engineering, focused on high-speed data acquisition from an optoelectronic system.

Affiliation: Aristotle University of Thessaloniki Faculty of Engineering School of Electrical and Computer Engineering

This repository contains the firmware, simulations, PCB designs, documentation, and measurement data for an embedded electronic system that performs high-speed data acquisition from an optoelectronic setup (e.g. photodiode + analog front-end) using a microcontroller-based platform.

Main components on the AD8338 VGA

AD8338ACPZ-R7ADC12040CIVYCD74ACT541M96E4SN74LVC1G14DCKRE4REF196GRUZ-REEL7OPA855xDSGMCP4728

AD8338 VGA bill of materials (BOM)

56 components, 30 distinct parts.

QtyPartRefs
1
AD8338ACPZ-R7
IC1
1
ADC12040CIVY
IC2
2
CD74ACT541M96E4
IC3, IC4
1
SN74LVC1G14DCKRE4
IC5
1
REF196GRUZ-REEL7
IC6
2
OPA855xDSG
U1, U2
1
MCP4728
U3
1
KC2520K40.0000C1GE00
Y1
2
Conn_01x01_Pin
J1, J4
2
Conn_01x02
J2, J3
1
Conn_01x01
J5
2
2.2u
CFTL_1, COFS_1
1
MH2029-700T
CHOKE1
8
~
DNP2, DNP3, DNP4, DNP_1, DNP_M_1, DNP_M_2, DNP_P_1, DNP_P_2
2
0
DNP-R1, DNP-R6
1
Conn_01x01_Pin
EXT_VREF_PIN1
1
Conn_01x12_Pin
OUTPUT1
1
~
PD1
2
10k
RMode_1, Rref_4
1
1k
Rf1
Show 10 more
QtyPartRefs
2
68k
Ri_M1, Ri_P1
1
5.1k
Rref_DNP_3
6
0.1uF
C1, C2, C3, C4, C12, C14
5
1uF
C5, C6, C7, C8, C10
1
10uF
C13
2
8x100 OHM
4816P-T02-101LF1, 4816P-T02-101LF2
2
1k
R1, R3
1
47
R2
1
10k
R4
1
2k
R5

AD8338 VGA design files

The KiCad project lives in the cnoikonom/Development_of_an_Electronic_System_for_High-Speed_Data_Acquisition_from_an_Optoelectronic_System repository on GitHub; these links point at the commit this page was built from.

AD8338 VGA: common questions

How big is the AD8338 VGA PCB?

The AD8338 VGA measures 79.3 × 47.5 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the AD8338 VGA?

56 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the AD8338 VGA design files?

From the cnoikonom/Development_of_an_Electronic_System_for_High-Speed_Data_Acquisition_from_an_Optoelectronic_System repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AD8338 VGA design in my own project?

Yes, under the terms of its MIT license, which cnoikonom chose for the repository.

More boards in Development_of_an_Electronic_System_for_High-Speed_Data_Acquisition_from_an_Optoelectronic_System

Similar boards