JST-Connector-Breakout
codetiger·JST-Connector-Breakout·JST-Connector-Breakout/JST-Connector-Breakout.kicad_pcb
About the JST-Connector-Breakout
JST-Connector-Breakout is an open source PCB design by codetiger, published on GitHub under the MIT license. It is a 2-layer board measuring 92 × 62 mm, with 30 components from 18 distinct parts.
Other key parts include the JST PH 1x04 and JST PH 1x05. By type, the board carries 24 connectors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Breakout boards for various standard JST Connectors
Main components on the JST-Connector-Breakout
JST-Connector-Breakout bill of materials (BOM)
30 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | JST PH 1x04 | CONN-SMD_4P-P2.00_XUNPU_WAFER-PH2.0-4PWB | U4 |
| 1 | JST PH 1x05 | CONN-SMD_5P-P2.00_XUNPU_WAFER-PH2.0-5PWB | U8 |
| 2 | JST SHD 2x08 | CONN-SMD_X1011WRS-2X08-9TV01 | CN1, CN8 |
| 3 | JST GH 1x03 | CONN-SMD_HC-1.25-3PWT | CN2, CN6, CN9 |
| 1 | JST GH 1x08 | CONN-SMD_8P-P1.25_YTC-A1251-08ABW | CN3 |
| 1 | JST GH 1x02 | CONN-SMD_2P-P1.25-HC-1.25-2PWT | CN5 |
| 1 | JST XH 1x02 | CONN-SMD_2P-P2.54-XH2.54-WT | CN7 |
| 1 | JST GH 1x06 | CONN-SMD_6P-P1.25_HC-1.25-6PWT | CN10 |
| 5 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J3, J10, J11, J12 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 3 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J6, J8, J9 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 2 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J13, J14 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J16 |
| 1 | AFC07-S15FCC-00 | FPC-SMD_AFC07-S15FCC-00 | FPC1 |
| 3 | JST PH 1x02 | CONN-SMD_2P-P2.00_XUNPU_WAFER-PH2.0-2PWB | H1, H2, H3 |
JST-Connector-Breakout design files
The KiCad project lives in the codetiger/JST-Connector-Breakout repository on GitHub; these links point at the commit this page was built from.
JST-Connector-Breakout: common questions
How big is the JST-Connector-Breakout?
The JST-Connector-Breakout measures 92 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JST-Connector-Breakout?
30 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the JST-Connector-Breakout design files?
From the codetiger/JST-Connector-Breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the JST-Connector-Breakout design in my own project?
Yes, under the terms of its MIT license, which codetiger chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979