Rf panel
About the Rf panel PCB
Rf panel is an open source PCB design by coffee-and-telesense, published on GitHub. It is a 2-layer board measuring 24.6 × 49.9 mm, with 28 components from 23 distinct parts.
Other key parts include the Si4463. By type, the board carries 6 capacitors, 5 connectors, 1 IC, 1 crystal and 1 antenna.
Main components on the Rf panel
Rf panel bill of materials (BOM)
28 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Si4463 | QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | 30MHz | Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | SPI | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | PWR | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 2 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J4, J6 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Antenna | SolderWirePad_1x01_SMD_1x2mm | AE1 |
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CC1 |
| 1 | 36p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CF1 |
| 2 | 20p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CF2, CF3 |
| 1 | 14p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CR1 |
| 1 | 6.8p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CR2 |
| 1 | 33n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LF1 |
| 2 | 47n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LF2, LF4 |
| 1 | 68n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LF3 |
| 1 | 300n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LR1 |
| 1 | 180n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LR2 |
| 1 | 390n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | Lchk1 |
| 1 | 50 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RF1 |
| 1 | 2.2u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 470p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 1 | 100p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
Rf panel design files
The KiCad project lives in the coffee-and-telesense/PicoAPRS repository on GitHub; these links point at the commit this page was built from.
Rf panel: common questions
How big is the Rf panel PCB?
The Rf panel measures 24.6 × 49.9 mm, has 2 copper layers and is 1.6256 mm thick.
How many components are on the Rf panel?
28 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rf panel design files?
From the coffee-and-telesense/PicoAPRS repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rf panel design in my own project?
The repository has no license, so all rights stay with coffee-and-telesense. Use it as a reference, and ask the author before reusing the design.
More boards in PicoAPRS
STM32Firmware edition
70.4 × 69.5 mm98 parts2LNo license2
STM32Dorji gps
70.9 × 70.4 mm86 parts2LNo license2
PayloadDorji
85.9 × 85.9 mm48 parts2LNo license2
PowerTest
34 × 30 mm40 parts2LNo license2
Rf frontend test
20.7 × 26.9 mm28 parts2LNo license2
Rf frontend test2
24.6 × 49.9 mm28 parts2LNo license2
Gnss test
18.2 × 36.4 mm16 parts2LNo license2
STM32Stm32u073-breakout
27.1 × 26.2 mm11 parts2LNo license2
USBC Breakoutboard
18.3 × 17.9 mm6 parts2LNo license2