15 open source boards using the Si4463
Real designs built with the Si4463, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Transponder-12.0.1
peterantypas
90.4 × 25 mm115 parts4LGPL-3.0446Microchip SAM
Project-Mach-1
ImperialSpaceSociety
30.5 × 82.6 mm82 parts4LNo license12STM32
Scoms tacnpr
partio-scout
99.1 × 99.1 mm279 parts4LTAPR-OHL-1.09STM32
Avionics-Telemetry
MSTRocketDesignTeam
80 × 93.6 mm87 parts4LGPL-3.08STM32
Flight computer
cuspaceflight
80 × 80 mm114 parts4LNo license2STM32
Firmware edition
coffee-and-telesense
70.4 × 69.5 mm98 parts2LNo license2STM32
Stm32f103 FlyBoard
fademike
35 × 25 mm88 parts2LNo license1STM32
DSAT Telemetry Board
NAIRA-MAN
152.7 × 108.6 mm76 parts4LAGPL-3.01ISM03
mlab-modules
50.3 × 40.1 mm65 parts2LGPL-3.01ESP32
Badge Tropicon 2026
ElectronicCats
99.7 × 100 mm63 parts2LNo license1STM32
TOAD
cuspaceflight
70 × 75 mm152 parts2LNo license93Rf frontend test
coffee-and-telesense
20.7 × 26.9 mm28 parts2LNo license2NXP
Low power module
Terrapin-Rocket-Team
58.8 × 63.1 mm49 parts2LNo license17Rf frontend test2
coffee-and-telesense
24.6 × 49.9 mm28 parts2LNo license2Rf panel
coffee-and-telesense
24.6 × 49.9 mm28 parts2LNo license2
How designs wire the Si4463
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the Si4463 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 100 pF).
- The TXRAMP pin is left unconnected on 10 of 12 designs.
- The RXP pin has a inductor on 8 of 12 designs, most often 47 nH (then 18 nH).
- The RXN pin has a inductor on 8 of 12 designs, most often 18 nH (then 20 nH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RXPpin 2 | Connected to: Signal 92% |
|
| RXNpin 3 | Connected to: Signal 92% |
|
| TXpin 4 | Connected to: Signal 83% · not connected 17% |
|
| NCpin 5 | Connected to: Not connected 83% · GND 17% | — |
| VDDpin 6, 8 | Connected to: 3.3V 75% · a signal 17% |
|
| TXRAMPpin 7 | Connected to: Not connected 83% | — |
| XOUTpin 16 | Connected to: Signal 64% · not connected 36% |
|
| XINpin 17 | Connected to: Signal 100% |
|
| GNDpin 18, 21 | Connected to: GND 95% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Transponder-12.0.1 by peterantypas, TOAD by cuspaceflight, Low power module by Terrapin-Rocket-Team and Project-Mach-1 by ImperialSpaceSociety.
The Si4463 in open source designs
The gallery holds 15 open source boards using the Si4463 from 12 GitHub repositories; a typical one measures about 70 × 69.4 mm and carries around 82 components.
60% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Transponder-12.0.1 by peterantypas.
Parts used alongside the Si4463
Microcontrollers on boards using the Si4463
What boards using the Si4463 are built for
Si4463: common questions
Where can I find a Si4463 reference design?
Each of the 15 boards on this page is a real design using the Si4463. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the Si4463 VDD pin?
The VDD pins have a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 12 open source designs using the Si4463.
How is the Si4463 TXRAMP pin connected?
The TXRAMP pin is left unconnected on 10 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the Si4463.
How is the Si4463 RXP pin connected?
The RXP pin has a inductor on 8 of 12 designs, most often 47 nH (then 18 nH). Counted from the KiCad layouts of 12 open source designs using the Si4463.
Which microcontrollers do boards using the Si4463 use?
Most are built on STM32 (8), ESP32 (1), NXP (1) and Microchip SAM (1).
How big is a typical board using the Si4463?
The median is 70 × 69.4 mm, and 60% are two-layer designs.
What is the most popular open source board using the Si4463?
By GitHub stars, Transponder-12.0.1 by peterantypas, with 446 stars.
Can I simulate one of these boards using the Si4463 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.