PayloadDorji
About the PayloadDorji PCB
PayloadDorji is an open source PCB design by coffee-and-telesense, published on GitHub. It is a 2-layer board measuring 85.9 × 85.9 mm, with 48 components from 33 distinct parts.
Other key parts include the LM386, DRA818V, MAX-M10M-00B, NUCLEO-L432KC and TPS61023DRLR. By type, the board carries 18 capacitors, 12 resistors, 6 ICs, 6 connectors, 5 inductors and 1 antenna.
Main components on the PayloadDorji
PayloadDorji bill of materials (BOM)
48 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM386 | DIP-8_W7.62mm_Socket | U1 |
| 1 | DRA818V | DORJI_DRA818V | U2 |
| 1 | MAX-M10M-00B | MOD18_MAX-M10M_UBL | U3 |
| 1 | NUCLEO-L432KC | MODULE_NUCLEO-L432KC | U4 |
| 1 | TPS61023DRLR | DRL0006A | U5 |
| 1 | AZ1117H-ADJ | SOT-223-3_TabPin2 | U6 |
| 3 | PWR | PinHeader_1x02_P2.54mm_Vertical | J1, J4, J6 |
| 1 | Conn_Coaxial | SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | UART | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Antenna | AC30157-01 GNSS Ceramic Chip | AE1 |
| 2 | 47nH | L_0603_1608Metric | L1, L3 |
| 1 | 68nH | L_0603_1608Metric | L2 |
| 1 | 2.0n | L_0603_1608Metric | L4 |
| 1 | 1u | L_1008_2520Metric | L5 |
| 6 | 100n | C_0603_1608Metric | C1, C2, C9, C10, C18, C20 |
| 1 | 50n | C_0603_1608Metric | C3 |
| 1 | 250u | C_1210_3225Metric | C4 |
| 1 | 10nF | C_0603_1608Metric | C5 |
| 2 | 20pF | C_0603_1608Metric | C6, C7 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10n | C_0603_1608Metric | C8 |
| 1 | 10p | C_0603_1608Metric | C13 |
| 2 | 10u | C_0603_1608Metric | C14, C19 |
| 2 | 22u | C_0603_1608Metric | C15, C16 |
| 1 | 1u | C_0603_1608Metric | C17 |
| 2 | 330 | R_0603_1608Metric | R1, R2 |
| 3 | 3.3k | R_0603_1608Metric | R3, R4, R12 |
| 1 | 10 | R_0603_1608Metric | R5 |
| 2 | 0 | R_0603_1608Metric | R6, R7 |
| 1 | 390 | R_0603_1608Metric | R8 |
| 1 | 1.47M | R_0603_1608Metric | R9 |
| 1 | 200k | R_0603_1608Metric | R10 |
| 1 | 620 | R_0603_1608Metric | R11 |
PayloadDorji design files
The KiCad project lives in the coffee-and-telesense/PicoAPRS repository on GitHub; these links point at the commit this page was built from.
PayloadDorji: common questions
How big is the PayloadDorji PCB?
The PayloadDorji measures 85.9 × 85.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PayloadDorji?
48 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the PayloadDorji design files?
From the coffee-and-telesense/PicoAPRS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PayloadDorji design in my own project?
The repository has no license, so all rights stay with coffee-and-telesense. Use it as a reference, and ask the author before reusing the design.
More boards in PicoAPRS
STM32Firmware edition
70.4 × 69.5 mm98 parts2LNo license2
STM32Dorji gps
70.9 × 70.4 mm86 parts2LNo license2
PowerTest
34 × 30 mm40 parts2LNo license2
Rf frontend test
20.7 × 26.9 mm28 parts2LNo license2
Rf frontend test2
24.6 × 49.9 mm28 parts2LNo license2
Rf panel
24.6 × 49.9 mm28 parts2LNo license2
Gnss test
18.2 × 36.4 mm16 parts2LNo license2
STM32Stm32u073-breakout
27.1 × 26.2 mm11 parts2LNo license2
USBC Breakoutboard
18.3 × 17.9 mm6 parts2LNo license2