HardLabs

Saintcon2018

compukidmike·Saintcon2018·Badge/Hardware Files/KiCad Files/Saintcon2018.kicad_pcb

Saintcon2018 PCB layout, top view — open source board by compukidmike
Simulate this board

About the Saintcon2018 PCB

Saintcon2018 is an open source PCB design by compukidmike, published on GitHub. It is a 2-layer board measuring 94 × 154.2 mm, with 292 components from 12 distinct parts.

Other key parts include the LolinD32, IS31FL3730, AP22802AW5-7 and AP2112K-3.3TRG1. By type, the board carries 256 diodes, 12 connectors, 9 capacitors, 7 resistors, 5 ICs and 3 switches.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

Pressing Select will take you into the menu. The options here are: Brightness, Wifi Status, Wifi Config, Minibadges, Back. - Selecting Brightness will allow you to change the brightness of the LED matrix. - Selecting Wifi Status will show you if the wifi is connected or not. - Se

Pressing Select will take you into the menu. The options here are: Brightness, Wifi Status, Wifi Config, Minibadges, Back. - Selecting Brightness will allow you to change the brightness of the LED matrix. - Selecting Wifi Status will show you if the wifi is connected or not. - Selecting Wifi Config will start the badge wifi configuration access point. In this mode, the display will show you the SSID and Password for the network that is being created by the badge. Connecting to that wifi network with your computer or phone will allow you to change badge settings like the wifi network that the…

Main components on the Saintcon2018

LolinD32IS31FL3730AP22802AW5-7AP2112K-3.3TRG1

Saintcon2018 bill of materials (BOM)

292 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LolinD32
U1
2
IS31FL3730
U2, U3
1
AP22802AW5-7
U4
1
AP2112K-3.3TRG1
U5
12
SAINTCON-Minibadge
J1, J2, J3, J4, J5, J6, J7, J8 +4
3
SW_Push
SW1, SW2, SW3
256
LED
D1, D2, D3, D4, D5, D6, D7, D8 +248
5
1uF
C1, C2, C9, C12, C13
3
0.1uF
C3, C4, C10
1
CP_Small
C11
4
4.7k
R1, R2, R4, R5
3
100k
R3, R6, R7

Saintcon2018 design files

The KiCad project lives in the compukidmike/Saintcon2018 repository on GitHub; these links point at the commit this page was built from.

Saintcon2018: common questions

How big is the Saintcon2018 PCB?

The Saintcon2018 measures 94 × 154.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Saintcon2018?

292 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Saintcon2018 design files?

From the compukidmike/Saintcon2018 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Saintcon2018 design in my own project?

The repository has no license, so all rights stay with compukidmike. Use it as a reference, and ask the author before reusing the design.

Similar boards