6 open source boards using the AP22802AW5-7

Real designs built with the AP22802AW5-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the AP22802AW5-7

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AP22802AW5-7 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 5V on 5 of 5 designs.
  • The IN pin is tied to VBUS on 4 of 5 designs.
  • The EN pin has a pull-up to VBUS on 2 of 5 designs, most often 100 kΩ.
OUTpin 1Connected to: 5V 100%
GNDpin 2Connected to: GND 100%
ENpin 4Connected to: Signal 100%
  • Pull-up to VBUS on 40% · 100 kΩ (2)
INpin 5Connected to: VBUS 80% · a signal 20%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Home mini v1-drop in pcb by iMike78, Saintcon2018 by compukidmike, R2022-10 by karlp and Nest mini v2-voice by marceldale.

The AP22802AW5-7 in open source designs

The gallery holds 6 open source boards using the AP22802AW5-7 from 5 GitHub repositories; a typical one measures about 97 × 80 mm and carries around 227 components.

83% use four copper layers or more, and 50% carry an open source license.

The most starred is Home mini v1-drop in pcb by iMike78.

Microcontrollers on boards using the AP22802AW5-7

AP22802AW5-7: common questions

Where can I find a AP22802AW5-7 reference design?

Each of the 6 boards on this page is a real design using the AP22802AW5-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the AP22802AW5-7 OUT pin connected?

The OUT pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AP22802AW5-7.

How is the AP22802AW5-7 IN pin connected?

The IN pin is tied to VBUS on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AP22802AW5-7.

What pull-up resistor is used on the AP22802AW5-7 EN pin?

The EN pin has a pull-up to VBUS on 2 of 5 designs, most often 100 kΩ. Counted from the KiCad layouts of 5 open source designs using the AP22802AW5-7.

What parts are used alongside the AP22802AW5-7?

The ESP32-S3R8, MPR121QR2, SN74LVC125APWR, TLV73333PDBVR and TPS62065DSGR appear in the most repositories here.

Which microcontrollers do boards using the AP22802AW5-7 use?

Most are built on ESP32 (2) and Microchip SAM (1).

How big is a typical board using the AP22802AW5-7?

The median is 97 × 80 mm, and 17% are two-layer designs.

What is the most popular open source board using the AP22802AW5-7?

By GitHub stars, Home mini v1-drop in pcb by iMike78, with 408 stars.

Can I simulate one of these boards using the AP22802AW5-7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part