Sb player esp
computergeek1507·sb_player_esp·hardware/ESP32-P4_OLED.kicad_pcb
About the Sb player esp PCB
Sb player esp is an open source PCB design by computergeek1507, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 29 × 34.1 mm, with 11 components from 10 distinct parts.
Other key parts include the MY-1220-03 and PCF8523T. By type, the board carries 4 connectors, 3 resistors, 2 ICs, 1 crystal and 1 capacitor.
It belongs with the displays & leds and audio designs in this gallery.
From the project
ESP32 Sequence Player
An FSEQ sequence player for the ESP32-P4 that drives holiday and animated light displays. Reads .fseq v2 files from an SD card and streams channel data out over E1.31 (sACN) and/or DDP to LED controllers, with synchronized audio playback and a time-based scheduler.
- FSEQ v2 playback — reads uncompressed sequences from SD card, frame-accurate timing via FreeRTOS tasks - E1.31 (sACN) output — up to 8 outputs, unicast or multicast, configurable universe/channel mapping - DDP output — up to 8 outputs with per-output channel mapping - Audio playback — WAV and MP3 via I2S DAC (PCM5102A /…
Main components on the Sb player esp
Sb player esp bill of materials (BOM)
11 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MY-1220-03 | BAT-SMD_MY-1220-03 | U2 |
| 1 | PCF8523T | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 32.768KHZ 32.768kHz | FC-135R_L3.2-W1.5 | Y1 |
| 1 | CONN_02X12_ODD_EVEN Conn_02x12_Odd_Even | PinSocket_2x13_P2.54mm_Vertical | J1 |
| 1 | OLED | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | UDA1334A | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | PCM5102A | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | 10UF 10uF | C_0805_2012Metric | C1 |
| 2 | 4.7K | R_0603_1608Metric | R1, R2 |
| 1 | 1k | R_0603_1608Metric | R3 |
Sb player esp design files
The KiCad project lives in the computergeek1507/sb_player_esp repository on GitHub; these links point at the commit this page was built from.
Sb player esp: common questions
How big is the Sb player esp PCB?
The Sb player esp measures 29 × 34.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sb player esp?
11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sb player esp design files?
From the computergeek1507/sb_player_esp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sb player esp design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k