22 open source boards using the PCF8523T

Real designs built with the PCF8523T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the PCF8523T

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the PCF8523T connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a capacitor to GND on 15 of 17 designs, most often 10 µF (then 100 nF).
  • The OSCI pin has a crystal on 14 of 17 designs, most often 32.768 kHz (then 32 kHz).
  • The OSCO pin has a crystal on 14 of 17 designs, most often 32.768 kHz (then 32 kHz).
  • The VDD pin has a pull-up to 3.3V on 12 of 17 designs, most often 1 kΩ (then 1.2 kΩ).
OSCIpin 1Connected to: Signal 94%
  • Crystal on 82% · 32.768 kHz (8), 32 kHz (1)
OSCOpin 2Connected to: Signal 94%
  • Crystal on 82% · 32.768 kHz (8), 32 kHz (1)
VSSpin 4Connected to: GND 100%
SDApin 5Connected to: The microcontroller 53%, a connector 41%
  • Pull-up to 3.3V on 65% · 10 kΩ (6), 4.7 kΩ (4)
SCLpin 6Connected to: The microcontroller 53%, a connector 41%
  • Pull-up to 3.3V on 65% · 10 kΩ (6), 4.7 kΩ (4)
INT1/CLKOUTpin 7Connected to: Not connected 65% · a signal 35%
VDDpin 8Connected to: Signal 76% · 3.3V 24%
  • Capacitor to GND on 88% · 10 µF (10), 100 nF (4), 2.2 µF (2)
  • Pull-up to 3.3V on 71% · 1 kΩ (9), 1.2 kΩ (1), 1.5 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Raspberry by Chrismettal, RadioSupport by LadyRoninEngineer, PiPLC-Mainboard by Chrismettal and Data-Logger-STM32 by can-caglar.

The PCF8523T in open source designs

The gallery holds 22 open source boards using the PCF8523T from 17 GitHub repositories; a typical one measures about 100 × 93.5 mm and carries around 79 components.

73% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.

The most starred is Raspberry by Chrismettal.

Parts used alongside the PCF8523T

Microcontrollers on boards using the PCF8523T

PCF8523T: common questions

Where can I find a PCF8523T reference design?

Each of the 22 boards on this page is a real design using the PCF8523T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCF8523T VDD pin connected?

The VDD pin has a capacitor to GND on 15 of 17 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 17 open source designs using the PCF8523T.

How is the PCF8523T OSCI pin connected?

The OSCI pin has a crystal on 14 of 17 designs, most often 32.768 kHz (then 32 kHz). Counted from the KiCad layouts of 17 open source designs using the PCF8523T.

How is the PCF8523T OSCO pin connected?

The OSCO pin has a crystal on 14 of 17 designs, most often 32.768 kHz (then 32 kHz). Counted from the KiCad layouts of 17 open source designs using the PCF8523T.

What parts are used alongside the PCF8523T?

The AMS1117-3.3, W25Q128JVS, RP2040 and RP2350_60QFN appear in the most repositories here.

Which microcontrollers do boards using the PCF8523T use?

Most are built on RP2040/RP2350 (6), ESP32 (3), AVR/Arduino (2) and Microchip SAM (1).

How big is a typical board using the PCF8523T?

The median is 100 × 93.5 mm, and 73% are two-layer designs.

What is the most popular open source board using the PCF8523T?

By GitHub stars, Raspberry by Chrismettal, with 451 stars.

Can I simulate one of these boards using the PCF8523T before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part