SataXH
comradef191·SataXH·SataXH/SataXH.kicad_pcb
About the SataXH PCB
SataXH is an open source PCB design by comradef191, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 58.3 × 48 mm, with 37 components from 15 distinct parts.
By type, the board carries 12 capacitors, 11 connectors, 4 diodes, 4 resistors, 2 transistors and 2 fuses.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
OSHW SATA power breakout board with protection
Contact me on Discord if you want to add yourself to this list!
SataXH bill of materials (BOM)
37 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Si2301CDS | SOT-23 | Q1, Q2 |
| 1 | 10101788-002CLF | AMPHENOL_10101788-002CLF | J1 |
| 8 | JSTXH-1x2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3, J4, J5, J8, J9, J10, J11 |
| 2 | SCREW-5.08-1x2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6, J7 |
| 2 | 3A | Fuseholder_Littelfuse_Nano2_154x | F1, F2 |
| 2 | 15v | D_SOD-123 | D1, D2 |
| 1 | GRN | LED_0805_2012Metric | D3 |
| 1 | RED | LED_0805_2012Metric | D4 |
| 2 | BLM18PG221SN1D | L_0603_1608Metric | FB1, FB2 |
| 2 | 10nF | C_0402_1005Metric | C1, C5 |
| 4 | 100nF | C_0402_1005Metric | C2, C6, C9, C10 |
| 2 | 1uF | C_0402_1005Metric | C3, C7 |
| 4 | 10uF | C_0402_1005Metric | C4, C8, C11, C12 |
| 2 | 100k | R_0402_1005Metric | R1, R2 |
| 2 | 200Ω | R_0402_1005Metric | R3, R4 |
SataXH design files
The KiCad project lives in the comradef191/SataXH repository on GitHub; these links point at the commit this page was built from.
- LayoutSataXH/SataXH.kicad_pcb
- SchematicSataXH/SataXH.kicad_sch
SataXH: common questions
How big is the SataXH PCB?
The SataXH measures 58.3 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SataXH?
37 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the SataXH design files?
From the comradef191/SataXH repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SataXH design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which comradef191 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979