Thin laptop cm5-audio right

CopperPilot·laptop·hardware/audio_right/thin-laptop-cm5-audio_right.kicad_pcb

Thin laptop cm5-audio right PCB layout, top view — open source Raspberry Pi board by CopperPilot

About the Thin laptop cm5-audio right PCB

Thin laptop cm5-audio right is an open source Raspberry Pi PCB design by CopperPilot, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 36 × 38 mm, with 62 components from 48 distinct parts.

Its main chip is the COMPUTEMODULE5-CM5, from the Raspberry Pi family. Other key parts include the TLV7041DBVR and TS5A23159DGSR. By type, the board carries 27 resistors, 20 capacitors, 8 diodes, 4 ICs, 2 connectors and 1 microphone.

It belongs with the audio and robotics & motion designs in this gallery.

From the project

A 13-inch thin aluminium laptop around a Raspberry Pi CM5: three KiCad boards, CNC enclosure, 66 Wh 2S pack, 45-65 W USB-C charging. Designed by CopperPilot, open for review.

1. CTIA / AHJ 3.5 mm 4-Pole TRRS Jack Mapping (J1, SHOU HAN PJ-320D, LCSC C431535): - Placed at (28.50, 19.00) mm, rot = 180.0 deg on F.Cu (mouth facing +X [1, 0, 0] into right-edge case cutout FAUDIO). - Verified pin-to-contact mapping in both lcsc:PJ-320D symbol and lcsc:AUDIO-SMDPJ-320D-1 footprint: - Pin 4 (Tip, deepest contact at pad (25.70, 22.50) mm): HPLJACK (Left headphone audio). - Pin 3 (Ring 1, middle contact at pad (29.70, 22.50) mm): HPRJACK (Right headphone audio). - Pin 2 (Ring 2, barrel-entrance contact at pad (32.70, 22.50) mm): GND (CTIA common ground return). - Pin 1…

Main components on the Thin laptop cm5-audio right

Thin laptop cm5-audio right bill of materials (BOM)

62 components, 48 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
COMPUTEMODULE5-CM5
TLV7041DBVR
U1
2
TLV7041DBVR
U2, U3
1
TS5A23159DGSR
U4
1
PJ-320D
J1
1
FPC-05F-8PH20
J2
1
ICS-40720
MK1
1
B16WS
PESD5V0S1BA
D1
1
TSD05CDYFR
PESD5V0S1BA
D2
1
TSD05CDYFR
PESD3V3U1UA,115
D3
1
C179414
PESD3V3U1UA,115
D4
2
PESD5V0S1BA
D5, D6
1
ESTVS2200DRVR
PESD3V3U1UA,115
D7
1
BAT54HT1G
D8
2
10UF
100nF
C1, C3
1
100NF
10uF
C2
1
100NF
100pF
C4
1
22UF
100pF
C5
1
22UF
10uF
C6
1
47NF
100pF
C7
1
4.7UF
100pF
C8
Show 28 more
QtyPartRefs
1
10UF
100pF
C9
2
100NF
2.2uF
C10, C12
1
1UF
10uF
C11
1
47NF
2.2uF
C13
1
22UF
2.2uF
C14
1
22UF
100nF
C15
2
100NF
100nF
C16, C18
1
22PF
100nF
C17
2
10UF
2.2uF
C19, C20
1
10K
2.2k
R1
4
10K
10k
R2, R3, R15, R17
2
10K
1k
R4, R21
1
22R
R5
2
10K
2.2R
R6, R7
1
10K
100R
R8
1
2.2K
100R
R9
1
4.7K
470R
R11
1
4.7K
10k
R12
3
10K
22k
R13, R16, R19
2
10K
100k
R14, R18
1
10K
47k
R20
1
8.2K
47k
R22
1
5.23K
2.2k
R23
1
100k
R24
1
2.2k
R25
1
100K
100k
R26
1
133K
2.2k
R27
1
24K
100k
R28

Thin laptop cm5-audio right design files

The KiCad project lives in the CopperPilot/laptop repository on GitHub; these links point at the commit this page was built from.

Thin laptop cm5-audio right: common questions

What microcontroller does the Thin laptop cm5-audio right use?

The Thin laptop cm5-audio right is built around the COMPUTEMODULE5-CM5, from the Raspberry Pi family.

How big is the Thin laptop cm5-audio right PCB?

The Thin laptop cm5-audio right measures 36 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Thin laptop cm5-audio right?

62 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Thin laptop cm5-audio right design files?

From the CopperPilot/laptop repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Thin laptop cm5-audio right design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which CopperPilot chose for the repository.

Can I test firmware for the Thin laptop cm5-audio right without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in laptop

Similar boards