HardLabs

CE-PiicoDev-Buzzer

CoreElectronics·CE-PiicoDev-Buzzer·PCB/CE-PiicoDev-Buzzer.kicad_pcb

CE-PiicoDev-Buzzer PCB layout, top view — open source AVR/Arduino board by CoreElectronics

About the CE-PiicoDev-Buzzer PCB

CE-PiicoDev-Buzzer is an open source AVR/Arduino PCB design by CoreElectronics, published on GitHub under the MIT license. It is a 2-layer board measuring 25.4 × 25.4 mm, with 17 components from 12 distinct parts.

Its main chip is the ATtiny1616-M, from the AVR/Arduino family. By type, the board carries 6 resistors, 2 connectors, 2 diodes, 2 capacitors, 1 IC and 1 transistor.

From the project

Hardware repo for the Core Electronics PiicoDev Buzzer Module

This is the repo for the Core Electronics PiicoDev Buzzer Module.

Guides for Micro:bit, Raspberry Pi and Pico

If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.

\"PiicoDev\" and the PiicoDev logo are trademarks of Core Electronics Pty Ltd.

Main components on the CE-PiicoDev-Buzzer

ATtiny1616-M

CE-PiicoDev-Buzzer bill of materials (BOM)

17 components, 12 distinct parts.

QtyPartRefs
1
ATtiny1616-M
U1
1
BSS138
Q1
2
—
J1, J2
1
I2C PU
JP2
1
MLT-8540H
LS1
1
ID
SW1
1
LED
D1
1
SS14
D2
1
100n
C1
1
10u
C2
4
10k
R1, R2, R3, R6
2
120R
R4, R5

CE-PiicoDev-Buzzer design files

The KiCad project lives in the CoreElectronics/CE-PiicoDev-Buzzer repository on GitHub; these links point at the commit this page was built from.

CE-PiicoDev-Buzzer: common questions

What microcontroller does the CE-PiicoDev-Buzzer use?

The CE-PiicoDev-Buzzer is built around the ATtiny1616-M, from the AVR/Arduino family.

How big is the CE-PiicoDev-Buzzer PCB?

The CE-PiicoDev-Buzzer measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CE-PiicoDev-Buzzer?

17 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the CE-PiicoDev-Buzzer design files?

From the CoreElectronics/CE-PiicoDev-Buzzer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CE-PiicoDev-Buzzer design in my own project?

Yes, under the terms of its MIT license, which CoreElectronics chose for the repository.

Can I test firmware for the CE-PiicoDev-Buzzer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards