22 open source boards using the ATtiny1616-M

Real designs built with the ATtiny1616-M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the ATtiny1616-M

Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the ATtiny1616-M connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 16 of 16 designs, most often 100 nF (then 1 µF).
  • The PB1 pin has a series resistor on 8 of 16 designs, most often 120 Ω (then 4.7 kΩ).
  • The PB0 pin has a series resistor on 8 of 16 designs, most often 10 kΩ (then 4.7 kΩ).
GNDpin 3, 21Connected to: GND 100%
VCCpin 4Connected to: 3.3V 81% · a signal 19%
  • Decoupling capacitor on 100% · 100 nF (19), 1 µF (3), 4.7 µF (2)
PB1pin 13Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 120 Ω (4), 4.7 kΩ (2), 22 Ω (1)
PB0pin 14Connected to: A connector 31% · not connected 25%
  • Series resistor on 50% · 10 kΩ (4), 4.7 kΩ (2), 22 Ω (1)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Env by bread-modular, Word watch by dragonlock2, PantoGraph by bask185 and CE-PiicoDev-Transceiver-915-MHz by CoreElectronics.

The ATtiny1616-M in open source designs

The gallery holds 22 open source boards using the ATtiny1616-M from 17 GitHub repositories; a typical one measures about 30.5 × 42.5 mm and carries around 37 components.

68% are two-layer designs, the rest use four layers or more, and 59% carry an open source license.

The most starred is Tinypulse by jonnor.

Microcontrollers on boards using the ATtiny1616-M

ATtiny1616-M: common questions

Where can I find a ATtiny1616-M reference design?

Each of the 22 boards on this page is a real design using the ATtiny1616-M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ATtiny1616-M VCC pin?

The VCC pin has a decoupling capacitor on 16 of 16 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the ATtiny1616-M.

What resistor goes on the ATtiny1616-M PB1 pin?

The PB1 pin has a series resistor on 8 of 16 designs, most often 120 Ω (then 4.7 kΩ). Counted from the KiCad layouts of 16 open source designs using the ATtiny1616-M.

What resistor goes on the ATtiny1616-M PB0 pin?

The PB0 pin has a series resistor on 8 of 16 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 16 open source designs using the ATtiny1616-M.

Which microcontrollers do boards using the ATtiny1616-M use?

Most are built on AVR/Arduino (21) and RP2040/RP2350 (1).

How big is a typical board using the ATtiny1616-M?

The median is 30.5 × 42.5 mm, and 68% are two-layer designs.

What is the most popular open source board using the ATtiny1616-M?

By GitHub stars, Tinypulse by jonnor, with 315 stars.

Can I simulate one of these boards using the ATtiny1616-M before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part