HardLabs

CE-PiicoDev-Ultrasonic-Rangefinder

CoreElectronics·CE-PiicoDev-Ultrasonic-Rangefinder·PCB/CE-PiicoDev-Ultrasonic-Rangefinder.kicad_pcb

CE-PiicoDev-Ultrasonic-Rangefinder PCB layout, top view — open source AVR/Arduino board by CoreElectronics

About the CE-PiicoDev-Ultrasonic-Rangefinder PCB

CE-PiicoDev-Ultrasonic-Rangefinder is an open source AVR/Arduino PCB design by CoreElectronics, published on GitHub under the MIT license. It is a 2-layer board measuring 25.4 × 25.4 mm, with 12 components from 9 distinct parts.

Its main chip is the ATtiny1616-M, from the AVR/Arduino family. By type, the board carries 4 resistors, 3 connectors, 1 IC, 1 jumper, 1 switch and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

The PCB project for the PiicoDev Ultrasonic Distance Sensor Module

If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.

\"PiicoDev\" and the PiicoDev logo are trademarks of Core Electronics Pty Ltd.

Main components on the CE-PiicoDev-Ultrasonic-Rangefinder

ATtiny1616-M

CE-PiicoDev-Ultrasonic-Rangefinder bill of materials (BOM)

12 components, 9 distinct parts.

QtyPartRefs
1
ATtiny1616-M
U1
2
—
J1, J2
1
Conn_01x04_Female
J6
1
I2C PU
JP2
1
ID
SW1
1
LED
D1
1
100n
C1
3
10k
R1, R2, R3
1
120R
R4

CE-PiicoDev-Ultrasonic-Rangefinder design files

The KiCad project lives in the CoreElectronics/CE-PiicoDev-Ultrasonic-Rangefinder repository on GitHub; these links point at the commit this page was built from.

CE-PiicoDev-Ultrasonic-Rangefinder: common questions

What microcontroller does the CE-PiicoDev-Ultrasonic-Rangefinder use?

The CE-PiicoDev-Ultrasonic-Rangefinder is built around the ATtiny1616-M, from the AVR/Arduino family.

How big is the CE-PiicoDev-Ultrasonic-Rangefinder PCB?

The CE-PiicoDev-Ultrasonic-Rangefinder measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CE-PiicoDev-Ultrasonic-Rangefinder?

12 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the CE-PiicoDev-Ultrasonic-Rangefinder design files?

From the CoreElectronics/CE-PiicoDev-Ultrasonic-Rangefinder repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CE-PiicoDev-Ultrasonic-Rangefinder design in my own project?

Yes, under the terms of its MIT license, which CoreElectronics chose for the repository.

Can I test firmware for the CE-PiicoDev-Ultrasonic-Rangefinder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards